Cairus

For 5Q0 Control unit 09 > Access authorization: 31347 > Adaptation > Channel "Assistance lighting functions - Menu control High beam assist" > Set value to "present" Control unit 09 > Coding > Byte 02 > Set bits 0-2 to "03 Bi-Xenon headlights with Light Assist" Control unit A5 > Coding > Byte 02 > Set bits 0-7 to "01 coding_Light_Assist High_Beam_Assist"

How High is the voltage

You have a Tool for Firmware Flash?

You need a Update

Why you Dont say that? Check the voltage with the multimeter Directly when a second Person Start the Car

Is the Error Directly after Start the Car?

Which SW you installed in the Radio?

Ist the Error without this Box?

Buy a New virtual Cockpit

IT IS Possible, that the Radio Update is the solution nur No warrenty from me. Ist the Error after Radio Update, Flash BCM

Red/Yellow ---> fuse 20A---> 12V Potential --->1,5mm² Brown ---> 0V Potential/GND---> 1,5mm² No warrenty

I will write, dont Worry...

Please Share a Autoscan

You need a Update from the Radio

I think you have a known problem with a certain hardware and software version that sporadically loses its basic settings on its own. Only a control unit update will help here.

Google Gemini: An SVM check at Skoda refers to the Software Version Management (SVM) coding, which is necessary to integrate new control units into a vehicle or to make changes to the software, often in connection with recalls or retrofits. The process requires access to the official manufacturer's diagnostic tool (ODIS), the matching of activation codes (SVM codes), and the execution of automatic adaptations to the control units to ensure the software functions correctly. How the SVM check works: Preparation: First, the retrofit kit or the new control unit is installed in the vehicle. Connection to the diagnostic tool: The manufacturer's diagnostic tool (ODIS) is connected to the vehicle. Starting the software adaptation: The "Perform retrofit/upgrade with license protection" function or a similar option is started via the "Special functions" menu. Entering the activation codes: The check prompts for the necessary activation codes (e.g., code 1, code 2, code 3), which are often supplied with the new control unit. Automatic Execution: After entering the codes, the activation is performed automatically and all necessary control units are adapted. Completion and Verification: Finally, the fault memory is cleared and the correct function of the retrofit is verified. SVM Code The SVM code (also called license coding) is a unique code that ensures only authentic and new control units are used. It is usually found in the packaging of the new control unit. Without this code, the software adaptation cannot be performed.

Which Radio System you have? HW Version? SW Version? SW Number of Version?

No

Thats the Problem Made SVM by Skoda Service Station

Which Part of light have the Error?

You have a 5Q0 camera, right? The FLA (Front Light Assist) is activated differently on this camera than on the 3Q0 camera. I've never had any problems with it.

Is the New unit Coding on your Car?

You need DSP also for this System

Is No Problem Airbag is own Connector in Yellow normaly

Replacing the plexiglass with the speedometer removed takes less than 5 minutes and is usually self-explanatory.