Thanks guys. i will PM everyone to refresh them with the new price

Rite, i have ordered 20 of these, 12 will be with us this week the rest are being made at the moment.

I have put up the original list of people that wanted the mount, if you would still like one, at the price of

Luke - You said these mounts were a really good help with doing 1/4 mile didn't you? I could do with a little more help.

I'll have one but it won't be until a months time. Can I put a deposit down or just order it in a couple of weeks?

I'll have one but it won't be until a months time. Can I put a deposit down or just order it in a couple of weeks?

hehe thats ok, you can order it then if you want, the price will be the same still if your name is on the list.

Jason;

Yea it helps loads with the gear changes, i have noticed it helps with traction off the line too

1.Irf

2.WW_VRS

3.gtjunior

4 Devonutopia

5 Shifty

6 Wardy

7 schrickvr6

8.skudmissile

9.Duggie

10 Mr Grumpy

11. Jonny5ive

12. Joff

13. 3 fs jnr

14. VeeKar

15. Robshaw

16. KaiserB_uk

17. beedie

__________________

1.Irf

2.WW_VRS

3.gtjunior

4 Devonutopia

5 Shifty

6 Wardy

7 schrickvr6

8.skudmissile

9.Duggie

10 Mr Grumpy

11. Jonny5ive

12. Joff

13. 3 fs jnr

14. VeeKar

15. Robshaw

16. KaiserB_uk

17. beedie

just wondering what's involved in fitting Luke,

i would pop along for the 15mins it'd take you to fit it but i think the journey's a bit on the hefty side

Scott

1.Irf

2.WW_VRS

3.gtjunior

4 Devonutopia

5 Shifty

6 Wardy

7 schrickvr6

8.skudmissile

9.Duggie

10 Mr Grumpy

11. Jonny5ive

12. Joff

13. 3 fs jnr

14. VeeKar

15. Robshaw

16. KaiserB_uk

17. beedie

just wondering what's involved in fitting Luke,

i would pop along for the 15mins it'd take you to fit it but i think the journey's a bit on the hefty side

Scott

Good Question - Same postion here im afraid luke - Is it an easy job or could you produce a guide on 'how to for everyone'

Rob

1.Irf

2.WW_VRS

3.gtjunior

4 Devonutopia

5 Shifty

6 Wardy

7 schrickvr6

8.skudmissile

9.Duggie

10 Mr Grumpy

11. Jonny5ive

12. Joff

13. 3 fs jnr

14. VeeKar

15. Robshaw

16. KaiserB_uk

17. beedie

Thanks for the PM Luke I hadn't looked on here today and for everyone here asking "How to?" Do a Search, it's out there I seen it wiv me eyes!

P.S. Luke I am in Cambridge this weekend how far to Jabba from there? Could "pop over" sat am if not too far. Cheers.

pps for the search: dogbone (all one word)

It's about 45 mins from Cambridge to Jabbasport, a nice easy drive along dual carriageways for most of it

It's a **** easy job with the car in the air. Two bolts - that's basically it. And even easier for me without having the engine tray to negotiate either.

It's a **** easy job with the car in the air. Two bolts - that's basically it. And even easier for me without having the engine tray to negotiate either.

Its very easy. done the octy done bone mount, i couldnt believe how easy it was.

http://www.briskoda.net/forums/technical-guides/changing-fabia-vrs-dogbone-mount/80462/

chrispy did a nice guide. 20 min job for someone in the know

Yea its really easy 5 bolts and its off, 5 more bolts and its back on

When are these up for sale and posting Luke??

12 of them have been ordered and sent out from vibra technice this week,

When they are with us i will give everyone a pm

Luke

1.Irf

2.WW_VRS

3.gtjunior

4 Devonutopia

5 Shifty

6 Wardy

7 schrickvr6

8.skudmissile

9.Duggie

10 Mr Grumpy

11. Jonny5ive

12. Joff

13. 3 fs jnr

14. VeeKar

15. Robshaw

16. KaiserB_uk

17. beedie

18. RandomRich

if its not to late

Nice looking piece of kit tbh. Wouldnt it be far cheaper and pretty much just as effective to just replace the big OEM bush with a solid poly one?? Or to do solid rubber inserts to stiffen it similar to the udder mod?

Bas

12 of them have been ordered and sent out from vibra technice this week,

When they are with us i will give everyone a pm

Luke

Roll on the friday 14th dogbone and clutch, the car should feel brand new:D

Mine will need to wait until after the CZ trip, but I have a feeling a LOT is going to be done to my car when I come back. Diff, bushes, dogbone, flywheel. Woot :woot:

Nice looking piece of kit tbh. Wouldnt it be far cheaper and pretty much just as effective to just replace the big OEM bush with a solid poly one?? Or to do solid rubber inserts to stiffen it similar to the udder mod?

Bas

If you look and see how much room there is to get the bush in, without making one to press in with a metal collar to keep it in place one with shoulders wouldnt fit in the gap!!!!

We even tryed filling the oem one with more Polyeurothane to strenthen it but it just didnt work!!!

Hence why we have had these done.

Vibra technics are probably the most well known people for engine mounts and bushes, quite simply they are the best.

If they happen to get involved in doing other mounts such as the engine ones, please let me know.

If you look and see how much room there is to get the bush in, without making one to press in with a metal collar to keep it in place one with shoulders wouldnt fit in the gap!!!!

We even tryed filling the oem one with more Polyeurothane to strenthen it but it just didnt work!!!

Hence why we have had these done.

Vibra technics are probably the most well known people for engine mounts and bushes, quite simply they are the best.

Thanks for the enlightening answer Luke. Nice to know that you tried out some different approaches.

Cheers

Bas

If they happen to get involved in doing other mounts such as the engine ones, please let me know.

Im working on these atm, a certan Lupo project im working on needs to use the Fabia mounts to hold the new engine in!!!

I will keep you posted.