Skip to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/11/26 in Posts

  1. That looks pretty typical. The fluid is just water from when it rains - there is a small drain hole at the base of the black plastic surround that allows any that collects to run down through a tube to the wheel arch (you can just about see it in your picture). That will be blocked so just push some strimmer wire or similar through it gently to clear and it'll run away.
  2. As @skomaz says it's a blocked drain tube. I had the same issue with Mrs Moley's Kamiq recently. I removed the blockage with a thin piece of wire. The drain hole is in the area marked with the yellow circle.
  3. What skomaz said. If you didn't notice a strong smell of petrol when you mopped it out then it's just water.
  4. How my MK3 looks It’s a strange setup I reckon it’s water build Up Just keep an eye on it
  5. New member, I have Karoq 2.0 TSI Black edition on order. Hoping to use the forum resource to help me get to grips with my first Skoda.
  6. 1 point
    Are you talking about the radar in the bumper? Or the camera which is housed behind the rear view mirror? If it’s radar, then I think it’s an ADAS calibration you need. Happy to be corrected on those that definitely know more about this than me.
  7. This one was purchased legitimately. I can’t speak for @Danoid s one though…
  8. Back home this evening and white LED torch installed. It’s B E A utiful. The last yellow light now gone! Doesn’t come out great on the photos but I’m very pleased! Great find by @Danoid Before After
  9. Hi all! I'm 30 something year old male from Finland. I got my first child about a year ago and the need for bigger car and isofix seat was imminent, so my trustworthy 2004 VW Bora 1.6 petrol had to go. I started looking for bigger car, as we needed to transport 2 adults, 1 baby and all their stuff for 2-4 weeks at a time because my job. I spotted 350 000 km 2014 Skoda Superb 2.0 TDI 4x4 Estate with good service history at an auction, and I thought it was superb mk3 rather than facelifted mk 2 so I bought it with 4000 €. It was about 3000 € cheaper than same mileage Superbs in Finland, so I was satisfied with my purchase. Soon I started to notice it had lots of small flaws: heated seats did not work, it did not warm in the wintertime, rear wheels did not engage at all and cabin is quite noisy. Other than that I like Superb a lot! There's room for take my whole family and all the stuff that we need while being 4 weeks away from home! I changed DSG thermostat and it seemed to fix the warm up issue. Then i changed Haldex oil and filter fixing the rear wheel drive. Now I have plans to restore Superbs old glory. At the time I'm planing to do follow: Fix heated seats (still no idea how..). Cover the cabin floor and doors with noise insulation mat. Remove all the rust and redo the body rust protection coating. Install MIB STD2 (I just received used unit from 2015 Skoda Yeti). Wish me luck. I hope to afford an electric vehicle in next 5 years or so, but until then I'll be fixing my Superb.
  10. 1 point
    The radar sensor is part of the car's Front Assist system and, if fitted, Adaptive Cruise Control (ACC)
  11. Recently just bought my second Skoda ... because the first one impressed me that much! 😎 2014 Superb Tour de France 4x4 2018 Kodiaq Edition 190PS DSG 4X4 (5 seater) Most of my cars have been VAG over the last few years but it seems that the balance of quality/price of Skoda has drawn me away from Audi and VW. I already have a couple of questions ... but I'll go find the correct place to ask 😉
  12. The car will be going to IAA Auctions up north. Spec of the car is attached. You may be able to determine why i was a bit upset at the write off. If anyone is interested in buying it to repair I'd be happy to talk to them. Reg number began with BG21.
  13. I think you mean 310mm/312mm rather than 300mm. The 288mm front brakes use separate brake caliper carriers, whereas the smaller 256mm front brakes use brake caliper carriers that are built into the wheel bearing housing. Therefore, when upgrading from 256mm to 288mm front brakes, the wheel bearing housing needs to be changed...as well as the front brake discs, front brake calipers, and front brake caliper carriers. The Fabia MK2 models that came with the 288mm front brakes have at least 105PS. So lowered powered models have the smaller 256mm front brakes. The OEM part numbers can be obtained from a Fabia MK2 parts diagram, such as lllparts. However, the brake system for the 288mm front brakes (and build code) was changed for the 2011 model year and onwards for the Fabia MK2. So up to and including the 2010 model year the Fabia MK2 has build code 1LN for its 288mm front brakes...and from the 2011 model year the build code for the 288mm front brakes became 1ZC or 1ZD. 1ZC and 1ZD are the same except for the colour of the front brake calipers/carriers. 1ZD is painted red. 1ZC/1ZD is an ATE brake system. According to wikipedia, the Fabia MK2 1.4TSI VRS came out in 2010 (the 2011 model year) and therefore would have the 1ZD 288mm front brakes. I haven't added the 1ZC/1ZD OEM part numbers below, but I the below OEM part numbers for the 288mm front brake discs and wheel bearing housings would also fit the 1ZC/1ZD 288mm front brakes. 288mm front brakes (TRW brake system) (build code 1LN) 6Q0615123 brake caliper housing left 1LN 6Q0615124 brake caliper housing right 1LN 6Q0615125 brake carrier with pad retaining pin left 1LN 6Q0615126 brake carrier with pad retaining pin right 1LN 1J0615301R brake disc (vented) d >> - 24.05.2009 288x25mm 5/100 1LN 6R0615301A brake disc (vented) d - 25.05.2009>> 288x25mm 5/100 1LN 6Q0698151A 1 set of brake pads for disk brake 1LN+9U0 6Q0698151C 1 set: brake pads with wear indicator for disc brake 1LN+9U1 wheel bearing housing for Fabia MK1/MK2/Roomster 288mm front brakes 6Q0407255S wheel bearing housing left 1LN 6Q0407256S wheel bearing housing right 1LN
  14. Mine (Elroq 60) was manufactured week 35, ready for delivery week 40 (actually had it rushed a bit to very end of week 39). VIN seems to be allocated very late in the process of Sales systems. Could it be due ensuring a customer contract is updated with defacto car for delivery (in case something happends in assembly or transportation ? Another note. I.e. Norway has VAT incentives running to the end of the year, which might put some priority to this market over others right now - sales are boosted these last months, and importeurs are trying their best to keep up.
  15. 1 point
    Glad it was simple and you dont have to rely on bus now. Alasdair
  16. 1 point
    UPDATE: It WAS the batteries! Initially bought 2x NEW Energiser Lithium CR2025s - inserted - no joy. Swapped for 2x Duracell CR2032 (slightly thicker, still fits) - Full Keyfob ops restored! Phew! (and don't buy Energiser batteries...)
  17. Had a look at https://www.startmycar.com/gb/skoda/fabia/info/fusebox/2010#anchorfusebox4 and it seems that fuse 51 (drivers side plus rear left)and fuse 52 (passenger side plus rear right) are for door control unit so I assume they do windows. Alasdair
  18. C pillar and top plastic edge of side trim which you would need to remove to install the torch holder anyway. C pillar clips on and trim is 4 Torx screws. It can be a little fiddly to replace but all very doable. The workshop manual describes clearly how to dismantle. I can send you the relevant pages if you don’t have.
  19. We are going offtopic, but just to say I do have a UK address through my forwarder to I have workarounds for shipping and delivery when "normal" is complicated. Otherwise Brexit would have seriously dented (not killed, mind you!) my unstoppable (masochistic perhaps!) passion for Land Rovers and other associated British machinery! 😁 RogueWagon let me rummage in the garage and I'll get back to you via PM, thanks! 😉
  20. Finally managed to find time to change the oil! Now running Pakelo Krypton Racing in 0W40 let's see how it manages the winter. The previous oil was Fuchs Titan GT1 in 5W40 which after 14 months and 8,750km came out pretty darkish, so good it was to replace. Car had little urban use, most hwy and a couple of them long hauls on a spirited manner 🫢 I also put already the winters, it is a wee early but I have time now, surely none later 🫣 Front pads have 1/3 left, so to keep in mind. Haldex is neglected and to do, but I lost the package with the bolts and seals so might reorder and if I ever find them ... is a consumable after all. I got a but of a worry as I found oily "wettish" in the area of where the dipstick is, but not sure if it comes from somewhere up, or where can it leak? The bottom engine cover is dry clean, the stuff goes towards the lower arm and seeps along the undercarriage. As far as I could see, the top of the engine (camshaft cover) seems dry. Any ideas at what to look at? The dipstick really? (never happened to me in like over twenty years of motoring).
  21. The wire for the hatch lights is red/blue and just behind the c pillar trim at a connector. A positap or soldered splice would be suitable. Constant power can be taken from anywhere and there is an earth point behind the trim too. Relatively simple diy job
  22. Pete, The Drivers Side Door Switches Illuminate with the lights. The driver side window controls don't operate either side at the moment. The passenger side window controls are not working either. Everything on the Drivers door works perfectly (i.e. Electric Mirror Controls, Electric Mirror, Central Locking & Door Switch For Interior Light.) The car has a full history and the previous owner has spent a fortune maintaining the car, which leads me to believe he has already had a garage look at it. This is why I'm trying to gather as much information as I can, as I expect the repair to be a little cumbersome and not straightforward, as he would have already resolved the issue if is was simple.
  23. We have Maxxis Victra sport 6 suv on our 1.5tsi and never had any issue with them. Seem to grip well in the wet. Not having to handle about of power but we are very happy with them!
  24. Udate, this issue has been traced to the wiring loom from the steering wheel, the column was in the lowest position and is causing an interruption in power to the dashboard kicking in the immobiliser circuit that momentarily cuts power to the engine causing a stall. With the steering wheel in the uppermost position the car runs perfectly. The job now is to have a look at the wiring loom for either a break in a cable, the loom catching when turning the steering wheel as while replacing the starter switch I may have caused the loom to be moved, or a loose plug. At least the car is now driveable again.
  25. Mines randomly leaking from the second radiator, doesn’t do it all the time but keeping an eye on it The way I traced it was literally jacking it up and removing the under tray and look around with a decent torch. I believe if the water pump is suspected it’s probably best to remove the wheel arch liner and you’ll see if it’s leaking
  26. 1 point
    I’ve had my 60 plate vrs for 11 years now. The engine replaced/ reconditioned at 26000. Miles. Excellent condition outside and in but everything is going wrong now. Recently replaced gearbox, door loop, but now supercharger is on its way out. It has 150k miles on the click and I need to commute to work 500 miles a week! Garage has had to take it apart to discover what the matter is. Supercharger is 1200 from vw plus labour. Is it worth paying nearly 2k to fix it? I have used my husband’s car atm for work but I don’t know what to do as I need to tell garage asap. I know I will hate this car for having to spend so much on it but how should I say farewell to it? Tia
  27. Most obvious is to check for signs of coolant on the block or general area below the vehicle when parked. Most likely failure is unfortunately the water pump already mentioned. Expansion caps have been known to fail and leak as well.
  28. You missed your opportunity when yours was in for the work!
  29. Just go to the dealer and do it whilst looking around a car….. hmmmm
  30. Very jealous. I came to the forums too late for @ApertureS to be doing the cool white upgrades. Was it from a newer Skoda? My father in law has a new enyaq, I wonder if I can swap it without him noticing…
  31. Got to try out my new boot light, fairly impressed It’s a direct replacement courtesy of a rental car, company played me about bit, so swapped my old warm looking rechargeable torch, that’ll teach em 😂
  32. Finally got a rear bumper on the car with the Reiger diffuser attached. It’s unpainted and I think new on that basis, although looks rough as has no doubt been kicked around a warehouse for years but painting will have to wait for now.
  33. I’ve had one, since March, and can very much recommend. It’s comfortable, quiet, looks good, and the level of tech is really good. Love the sports seats in the SportLine, I’ve had back issues on long journeys in other cars, but they’ve very much gone now - seats are very supportive. Not had any reliability issues. Have had a windscreen crack (stone chip) and had to order some new windscreen trim after going through the monkey enclosure at Knowsley Safari Park, but that’s hardly the car’s fault 😆 Boot space is excellent, and there’s still plenty of legroom for back seat passengers if you pull the back seats forward a little. Love the tech levels. The LED headlights are absolutely fantastic. The entertainment system is one of the best I’ve had, no lag, no bugs when you press something. Wireless CarPlay works great. Nice big screen. Can recommend getting the Head’s Up Display option - makes road concentration so much easier. The Skoda app works really well to set charge levels, set remote preconditioning, check fuel efficiency, etc. The hybrid (rather than full electric or full combustion) suits me perfectly. I usually do short journeys and so the car runs on electric mode most of the time, with using the hybrid on longer journeys. Like you, we’ve got a home wall charger, and ours is linked to solar panels, so frequent short charges (especially when it’s sunny) suits perfect. I’m currently at 135 mpg since my last visit to the petrol station (about 6 weeks ago, still got about 85% of a tank left). Since March (with about 2 months of doing 120 mile-round journeys twice a week for work), I’m averaging 85mpg. Minor grumbles (and they are minor) - it can be a little frustrating if you need to boot the accelerator from a standstill (like coming out of a side road onto an A-road), as there is a slight lag when the petrol engine kicks in from the initial electric pull-off, but that’s a minor grumble in that particular situation (and probably comes from my previous vehicles being 3.2 litre diesels). Normal driving is absolutely fine, pulls well on motorways even when fully laden (me, the other half, two kids in the back, boot full of camping gear, and a roof box). Another minor grumble is that the reverse parking sensors don’t seem to be as sharp as my previous cars - if you reverse at anything other than a crawl, you can be caught out as there seems to be a lag in the sensor alert. But again, that’s minor and I’ve just adjusted my driving style. But other than that, I really can’t pick any other faults.
  34. @Tom-Kodiaq Seems this thread was hijacked, so I would like to reply to your original question, after reading through it. I live in Romania, Bucharest, we use metric system as well, I own a VRS and has almost 6k KM since December 2025. Here is the fuel consumption I've seen so far: highway driving at low speed (90-100 KMPH) - 6-7 L / 100KM highway driving at normal speed (130 KMPH) - 8-9 L / 100 KM highway driving at high speed (180 KMPH) - 16-17 L / 100 KM highway driving at very high speed (225 KMPH) - 23-24 L / 100 KM city driving at night (occasional red lights, very low traffic, 50-70 KMPH) - 9-10 L / 100 KM city driving during the day (regular traffic, 40 KMPH on average) - 12-13 L / 100 KM city driving during the day (heavy traffic, less than 25 KMPH on average) - 15-16 L / 100 KM There is also a matter of how light your foot is, my wife is more gentle and sometimes manages 1-2 L / 100 KM less than me, in heavy traffic, as she pulls out slower, leaves bigger gaps, but only sometimes. The other factors, like temperature (colder means more fuel needed), driving mode (I'd advise against any mode other than default Normal - Comfort/Snow/Offroad only if the road condition requires it and Sport only if you need to overtake and feel the need for it). I tried Eco and the saving is minimal, while the car feels gutless, and this from a VRS. I previously owned a Tiguan Allspace, driving modes assessment was the same, just the fuel consumption was a bit better, as that had 190 BHP, still the same 2.0 L petrol engine. 4x4 is not a factor, as these cars are not real 4x4s, this is electronically controlled, mostly FWD uless you demand it otherwise or the computer deems some power is needed on the back wheels. as @aronisk put it, a car weighing over 2T is not eary to move and will always have a relatively high consumption. Also, this is not a car for city driving. We have it as a vacation car, and use it 1-2 times a week to make sure it gets moved. For city driving, especially if you live in a house, an EV is the best option, or, if you live in an apartment building, like me, a HEV is the next best choice (Corolla, Yaris, Prius) - only if you make the KM to justify the increase in purchase cost. If not, stick to a smaller vehicle, petrol engine, NA if possible and you should get no more than 7-8 L / 100 KM in heavy traffic (our daily driver is a Mazda 3, getting that or even better). Hope it helps.
  35. Hi, Here are some modifications I've made with a genuine VCDS Hex-V2 on my MY2022 Kodiaq. /!\ DISCLAIMER /!\ I've made these mods alone. Some may be irrelevant for your Kodiaq (depending on MY, control unit HW or SW version, equipment, etc.). Don't attempt to duplicate them on your car if you don't know what you're doing. I'm not responsible for any damage on your car. If you're not sure, don't do it. Any changes are done entirely at your own risk Always save the original settings before attempting any mod! Enable 'Tear drops' wiping on front wipers: 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "6B-Front_wiper – Traenenwischen Front Status" channel Old value = Not active New value = Active Save. 09 – Central electrics. Coding – 07 Select 2nd line in the drop down menu: "1-565 995119B – J400FRWISCH" Byte 0 – Tick Bit 3 “Adaptative Post/tear Wiping Active” Byte 2 – Tick Bit 5 “Post/tear Wiping Active” Old value = 104D0D New value = 184D2D Sauver Enable 'Tear drops' wiping on rear wiper: 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "88-Rear_Window_Wiper – Traenenwischen Heck" Old value = Not active New value = Active Save. 09 – Central electrics. Coding – 07 Select 2nd line in the drop down menu: "1-565 995119B – J400FRWISCH" Byte 0 – Tick Bit 3 “Adaptative Post/tear Wiping Active” Byte 2 – Tick Bit 5 “Post/tear Wiping Active” Old value = 104D0D New value = 184D2D Sauver Enable Fan Level display on Climatronic 'Auto': 08 – Air Conditioning Coding – 07 / Long coding assistant Byte 11 – Tick Bit 6 : Blower Status Display in Auto-Mode active Sauver Old value = 16010104000410011105100D00109136 New value = 16010104000410011105104D00109136 Disable DRL when parking brake is ON: 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "Außenlicht_Front - Tagfahrlicht Dauerfahrlich bei Handbremse abschalten" Old value = Not active New value = Active Save. Enable warning lights upon emergency braking: 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "Aussenlicht_Blinker – Emergency alert blinken" Old value = Not active New value = Active Save. Enable Brake flashing lights upon emergency braking: 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "Aussenlicht_Heck-Notbremsanzeige NBA" Old value = Not active New value = Active Save. Enable Heart-Beat light effect on Start Engine Button for Keyless: 05 – Access/Start Authorisation Security Access – 16 : 20103 / Adaptation – 10 Select "ZAT_illumination_concept_mybeat_clamp58xt » Old value = Not activated New value = Activated Save. Select "ZAT_illumination_modus_mybeat_clamp58xt" Old value = Not activated New value = Activated Save. Check number of Launch control on DSG gearbox: 02 Auto Trans Adv. Measures Type “Launch” in the search bar Tick "Anzahl Launch Control Anfahrt" Note the displayed value I have some more to test, but not done yet. Share your owns if you want.
  36. I've made this mod on my ex-Superb Mk3 and lived happily with it for roughly 7 years. It simply works. The S&S did not kick in all the time. Many VCDS owners have completely disabled their S&S by setting this start voltage limit to 12.0V. Maybe I misunderstand o mistranslate your sayings (sorry I'm french, nobody's perfect), but I don't see what makes you say this method is a rumor. Of course there are probably most optimized ways to make the S&S less invasive. But considering a gain/effort ratio aspect, I don't know any better way or even at least as efficient as this one. If you do, please share. 🙂 You're absolutely right. But still considering a gain/effort aspect, what you propose would have taken me way more time. I've tried this mods on my own. Nobody told me what versions of HW/SW they work with. For any of the mods I've found, if it works, this makes me happy. If it fails, no problem, my car remains as it was before. Note: I already make you save time. I don't share those which failed for me... ;) Cheers.
  37. Easy entry for both driver and passenger seats 36 Driver Seat Coding - 07 / Long coding helper Byte 3 – Tick Bit 1 : Easy_Entry_front. 0 = not active --> 1 = active Byte 6 – Tick Bit 4 : EasyEntry_Enable_Passanger_over_DriverMMI. 0 = not active --> 1 = active Byte 9 – Tick Bit 6 : Easy_entry_front_over_MMI. 0 = not active --> 1 = active Save 06 Passenger Seat Coding - 07 / Long coding helper Byte 3 – Tick Bit 1 : Easy_Entry_front. 0 = not active --> 1 = active Byte 6 – Tick Bit 4 : EasyEntry_Enable_Passanger_over_DriverMMI. 0 = not active --> 1 = active Byte 9 – Tick Bit 6 : Easy_entry_front_over_MMI. 0 = not active --> 1 = active Save 5F Multimedia Security Access – 16 : 20103 / Adaptation – 10 Select « Vehicle_Function_List_BAP-driver_seat_0x10 » channel Default value = Not actived New value = Actived Select « Vehicle_Function_List_BAP-driver_seat_0x10 msgbus » channel Default value = Not actived New value = Comfort data bus Select « Vehicle menu operation-menu_display_seat_configuration » channel Default value = Not active New value = Active Select « Vehicle menu operation-menu_display_seat_configuration_over_threshold_high » channel Default value = activated New value = activated Save Forgot to say, most of these codings are inspired by the tremendous job shared by @MartiniB 👋 in the Superb Mk3 forum! I want to thank him 👏 !
  38. Hi, 3 news codings tested and confirmed: Display the fuel top-up quantity on the dashboard 17 – Instruments Coding – 07 / Long coding assistant codage long Byte 10 – Tick Bit 4 : Volume to be replenished, Yes Save Display the G-metre 17 – Instruments Coding – 07 / Long coding assistant codage long Byte 10- Tick Bit 2 : Display Acceleration Save Change the corner lights cut-off speed 09 – Central electrics. Security Access – 16 : 31347 / Adaptation – 10 Select "(16B) – Stationary cornering lamp -Upper speed threshold" Default value = 40.0 km/h Set new value = XX (60.0 km/h maximum To Be Confirmed) Save

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.