Kenny R

Looks like you have inadvertently turned the RH scroll button and selected trip mileage which then gives you the option to reset by pressing and holding , the RH scroll button in my case ( Kodiaq).

Twister spotted near my home town.. b2ed5b04-3c9b-4c34-aa41-30195c40c101.mp4

They stick out in freezing conditions if the washer fluid is not the correct concentration for winter. Should go back in when defrosted.

New blade from EBay delivered today and have fitted will update on performance etc. New blade on left original on right.. And on looking at receipt, blade supplied by Heyner UK

RHD Kodiaq’s here in the UK have a 25” blade on the drivers side and 21” blade on the passenger side from the factory. Bosch recommends AP24U and AP21U and that’s what I’ve fitted to my previous and current Kodiaq.

Canny whack a bus ride

Still no sign of a Bosch replacement blade for facelift models, and the replacement from dealer is both expensive and rubbish so having spied this one on eBay I have ordered one to see what it’s like. Put it this way it will be hard to be worse than the Skoda effort.

If the Karoq Sportline wiper has changed, the same as the facelift Kodiaq the blade changed from 13” with a square locking button to 11” with an oblong button. As mentioned above no Bosch replacement has been made available and only option was from dealer. Today I found this on eBay and have ordered one to see what it’s like, put it this way would be hard to be worse than OEM

From the owners manual…

Using the DSG sport mode disables coasting but 2cylinder mode still operates on my 2022 Kodiaq.

If it is the eco symbol similar to the one in photo attached, then it shows that the engine is in 2 cylinder mode that occurs on light throttle on a flat surface. https://youtu.be/yoohR8sar5g?si=wPNmfLBd1DheMGyN

Part Number: 5E0601151FOD

If it has had a new cam belt and water pump, the coolant would have been drained. It could just be the coolant finding it’s level after being re filled and any air bubbles released. I would fill to correct level and monitor closely for a few days.

According to the owners manual, “ the system function can be restricted in unfavourable weather conditions “ . I presume fog snow etc could confuse the camera.

These two, as they are linked to engine systems will stay on with only ignition on till the engine is started.

When you are charging the battery are you connecting the -ve from the charger to the dedicated point on the bulkhead and not to the battery -ve terminal.