Skip to content

travs

FREEDOM
  • Joined

  • Last visited

Everything posted by travs

  1. Be careful when on the look out for parts. Generally Skoda's, aside from the vRS models (and mostly the Octavia out of those), are a bit of an afterthought by tuners; it's more that parts made for other cars in the group are applicable as an afterthought. Also not that although they are all called MQB chassis, that's actually split into 4: MQB A0 - Polo/A1/Fabia MQB A1 - T-Roc/Seat Ateca/Octavia/Karowq MQB A2 - Skoda Kodiaq MQB B - Skoda Superb. Other cars in MQB-B are Passat or Arteon. Point being: some parts fit across the ranges, others don't. Generally, engine stuff will be like for like - EA211 which is yours will be the same; but stuff dictated by chassis size won't always - exhaust comes into this. Downpipe should be fine as the connection to the turbo will be the same (but its a bu66er to change because of the routing above the subframe). But the chassis are different so you may need a custom one or potentially can cobble together bits with extensions clamped up between, bearing in mind checking exhaust hangers and other bits are in the right place.
  2. Lucky he doesn’t have warning stickers on the back of his van. Sorry for the sh*tshiw @Stunts - hopefully you get something and back on the road quickly
  3. Is it this sort of thing? Mygolfmk7
  4. Did you take the opportunity to have this bit cut open to aid induction airflow? On topic - yeah that did look rusty - how old is the car and are you coastal? Or was the previous owner coastal do you know?
  5. Happy to share knowledge and lessons learned. It’s amazing when you do two sides how slow and cumbersome the first side and how you do the second side so quickly and easily. BTW just saw these on a Facebook MQB Classified post: Whiteline front droplinks for sale
  6. Dammit - I knew it didn't look quite right!
  7. Could have sworn I replied to this. I didn't change the hubs - felt like that wasn't something that was known to benefit and, as you see, it starts to spiral into a requirement to change other parts. You don't need to do Shocks and springs unless you were already intending to - the subframe is needed to be dropped for the arb and also for the nearside lower arm if you have dsg as the gearbox casing gets in the way of removing one of the bolts. On that basis, if you're aiming for one, its best to do all of them, along with a 4wa after. That was @OccyVRS 's original point. Rears: arb is a good one to tighten up rear roll. Technically, its going to move the handling towards oversteer but you'll only find that on a track. Get one and put it on the stiffest setting. It will also be more communicative on the way to the limit. Opinion appears divided on whether the rear droplinks are good enough. I never had a problem, but since fitting the Superpro ones, I've definitely noticed more solidity so I'd say its worth it for that. Superpro, Hardrace, Whiteline, Racingline, APR, 034 - all fine. They're a bit fiddly - and be prepared to jack up the control arm underneath to compress the spring in case access to the nut (and centre triple square) is blocked. We also found jacking up the other side helped too. Videos make it look nice and easy, but on min it looked like the bottom bolt had been done up too tight, pinching the droplink and stopping it from seating nice and easily. We ended up attaching to the arb, then trial and error with the jack o the other side to make the arb force it into the arm. You also need to torque when the suspension is under load instead of drooping, so either on ramps, or jack the hub up until its starting to take the weight and then finish it off.
  8. Now it’s perfect 🤌🏼
  9. There are some decent deals on there at the mo. A few with digidash too. Tbh you really don’t want to discount the hatchback. You lose such a tiny amount of boot space proportionally - it’s still bigger than anything in class; it’s only really the load lip that make a material difference.
  10. An inch is quite something. From what I’ve seen online and played with on mine you can see and feel the torsional tension adjusting and relaxing when the suspension is loaded. You think that’s raising the ride height though?
  11. @MarioVrs They're Bilsteins on there - B6? Has it settled any more? I know if they're not equally adjusted they will put torsional forces on the arb but I don't think they would have enough to lift a corner. Also, I had to relook at mine, I don't think Racingline ones are top/bottom; seem entirely reversible so possibly the mechanic just didn't think there'd be that factor? I see the 034 ones come in bits to put together though. RL ones are already made and you just rotate the main middle bar to extend or retract both when car is down on the floor etc.
  12. In case @Macsamillion isn't around much: Try this post @MartiniB will also have a table to post too 😀
  13. I've found on a rolling road (not a rolling-road) you can use it kind of well, but it takes so much concentration to lift off early and roll, because as soon as the normal car in front lifts-off, they slow down quicker and you have to tap the brake to let the clutch back out. And, like you both say, lift off without coasting and you use no fuel as the drivetrain keeps the engine turning over, lift off with coasting and you're using fuel to keep the engine idling. I thought there'd be some improvement due to the trade-off between emissions and inertia but agree in real world scenario, mode hasn't made a difference. In fact, I've done the journey from my in-laws which is 80 miles of single-lane A-road and motorway and can get the same result in Sport Mode as Eco. For me, its down to the driver not the car.
  14. Ok so you probably have it a bit easier than the Superb guys. The big thing with the LCAs is that the key variant is track width of the car - determined by how long the width-section of the arms are and depending on a number of things the main one being which version of the mqb chassis you have. Despite the whole MQB is MQB - it isn't. There's MQB A0 (eg polo/fabia), MQB A1 (Golf/Octy) and MQB-B (Superb/Passat). Bigger the chassis, generally the wider the track width but there are variations. For example, Audi RS3 is MQB-A1 but understandably has a wide track. The front track width of the Golf is 1541mm. The Octavia is 1535mm so 6mm across the car which is nothing. Superb is 1584mm. So the Superpro TRC1070 which is deemed as applicable to anything coming out of Germany is meant for MQB-A1. Fine for yours and will do well (don't bother with TRC1071 which gives increased caster - its a pub-quoting improvement rather than anything that's going to get you anywhere if you're not doing things like track days and corner balancing). But stick the TRC1070 on a Superb and it pulls the bottom of the wheels in giving you positive caster, unable to get a decent 4wa and putting strains on other components. I have TT arms on mine. The Delphi version is TC4442/TC4443 but they weren't in stock so I went for KYB which are KSC4260/KSC4261. Its odd as the Delphi is quoted as being for the Passat but the KYB aren't. Tbh, they seem exactly the same. It definitely feels nice and solid and I think that's because of the solid rear bush. The old ones didn't look bad coming off but there is definitely a more solid feel to it. Weight wise, 2% of SweetFA in the grand scheme of things but either marginal gains matter to you or they don't. Alu arms were £75 each, but with £35 shipping from Spareto in Estonia so £180. It said DHL would handle shipping and duty but what that means, is they'll pay it so they can pass through customs and deliver and then hit you with the re-charge. That was an unforeseen extra £53 so c.£230 in all. You can avoid a lot of that by ordering from somewhere in the UK. In fact: Link for Delphi Front Right on ebay Link for Delphi Front Left on ebay As for subframe, they all seem the same. In fact, they're right across the Passat range right down to the 1.4, so I was thinking about getting a pre-loved one from ebay, and as I have a redundant Racingline dogbone mount insert for a certain type of dogbone mount, I might as well go for one that has the same type (they differ by engine code - I found that out the hard way but I posted the list so you can enjoy). So what do you get? The alu one is lighter naturally but stiffer as its more solid - the steel one is stamped steel sheeting so it has more flex in it. Will we notice? Probably not without telemetry. As @OccyVRS says, if you're going to do it, you might as well save a load of hassle and get the front anti-roll bar done too as it sits above the subframe which needs to be dropped to change the arb. And this will absolutely throw out the alignment so queue up one of those for shortly after too. Front droplinks don't need to be changed unless you switch to coilovers or shocks where the mounting point is in a lower position than standard parts. But your suspension is only as good as its weakest parts so...why not. They're straightforward to change (note you need an M6 triple square) and if they replacements are adjustable you can really dial out any pre-load on the anti-rollbar (if, as said before, the mounting point on the shock is lower and putting torsion on the arb). I'd absolutely advise getting a balljoint splitter if you don't have one too. The lower balljoints are a bugger to get out with a mallet! I think that's everything I can think of for now. Oh, and make sure the dogbone bolts go into the DSG casing straight - its a very bad day to realise you've crossed and it needs helicoiling.
  15. This is the mk3 forum so do hit up the mk4 forum as well. But while you’re here, that’s a lot of miles in 18 months. With the DSG in that model, the Skoda service interval is 80k miles but the previous 6-speed was 40k. Most people kept to the 40k as oil changing is really important. So if it hasn’t had it done, I’d do that.
  16. Should be 312mm vented front discs, 300mm solid (non-vented) rear discs. Plenty of places claim to provide the right options while offering all different options so check that. Have you checked the quick checks? Feel the wheels after a drive (carefully) - extra hot (hence the care) or cold will be a sticking caliper (stuck on or stuck off respectively). Stuck on means it’s on a bit but won’t move more to brake. Check brake fluid level. Perhaps have them bled too to make sure there’s no air in the system.
  17. Haven't noticed on mine either - have you got adjustable rideheight?
  18. Fingers crossed. Interesting - on old BMW E36 forums it used to be: Car idling rough - camshaft position sensor Car idling rough and stalling - crankshaft position sensor.
  19. I’m guessing there’s an allusion to using the ground point - I’m still old school and connect to the terminals. Is it better to connect to the grounding point?
  20. Get a decent tester on the battery anyway - just to knock that on the head. Keep us posted. I hate mystery issues so you have my sympathies in place if any expertise.
  21. Some noise has returned - not in normal driving; car feels solid (especially the rear droplinks - you can feel the solid transfer) and the solid rear bush in the LCA. Going over most speedhumps is also fine - only the harsh "brickwork" ones seem to really bring out the sound. Unfortunately part of my mind thinks that it might also be the ARB now it has all been taken apart and put back on the car so its been moved from the factory application. Mind is drifting towards an alu subframe which means I'll get clamps for the H&R and have that swapped all in one go.
  22. Doesn’t give much to go on. Although the yellow battery indicator on the right; is OBD11 saying battery is one of the error codes? A battery on its way out is famous for all the most random errors - can you get a decent tester on it? How old is it?
  23. What’s the error on OBD11? Driving at high revs heats up the exhaust and helps cause a passive regen (burning off the soot) but if that’s not the key issue then it’s not the solution to the problem. You could have a sensor breaking down which is sometimes causing an implausible signal - driving at high revs does nothing for that.
  24. Sad times indeed @logiclee bit hopefully the Enyaq replaces it suitably. Enjoy!

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.