VCDS options on Superb III

[laimuxx]

On 03/10/2019 at 21:43, matisere said:

Finally i did this. Thank you for the provided table.

[Bap33]

@Anquetil If you have VC, you just need to configure the informations you want to display on it. Including Engine Oil temp and Engine Coolant temp...

Forget the MOT, you're too 'young' to understand... only 'needles owners' know... 😂 

Edited 7 November, 2019 by Bap33

[Bap33]

Hi all,

 

I've heard about a hidden "snow mode" for AWD version. It's available as standard on Kodiaq 4x4 with DCC:

 

Official short description here : https://www.skoda-storyboard.com/en/kodiaq_int_0006/

 

It seems it could be activated on Superb 4x4 too. Does anyone know how?

Thanks.

[deathskull]

Hi, I have a question about start stop system on MR2020 (SIII FL). Change volt limit (from 7.6 to 12.1) didnt work (start stop system still working). Can samone advise me how permanently turn off start stop system?

Thanks a lot.

[Alx21]

Hello,

 

Does someone know if the warning:" key not found" from the instrument cluster can be disable in the next situation: Engine is running  and the driver is outside of the car with the key at him (even in the situation when the option that car can be closed with engine running)?

 

Thank you,

 

Alex

[JR RS]

if anyone is interested in a "pulsating" Engine Start-Stop button, here is how:-

 

 

Ignition ON/OFF button (KESSY): activate heart-beat pulse

1. Go to the module 05-Acc/Start Auth 
2. Select Security Access, enter 20103
3. Select Adaptation
4. Change the channels below to activated
   - Search lights "ZAT_illumination_concept_mybeat_clamp58xt"
   
   
   
   - Search lights "ZAT_illumination_modus_mybeat_clamp58xt"
   
   
    
5. Select "Do It"
6. Exit VCDS - the button starts it's heat-beat pulse immediately after the changes are made

 

NOTE: the heart-beat effect only pulses when the door is unlocked and the engine is not turned-on, and after the engine is switched-off and the interior lights are still illuminated. Whilst the engine is running, the button illumination is a steady colour.

its subtle, but a nice touch.

 

@Gizmo - u can add this to the Tried and Tested thread, if you want.

 

Edited 8 November, 2019 by JR RS

[Dtc2010]

Hy, i want to change the speed when high beam is turning on  or of, i have adaptive headlights on my 2016 skoda superb, i tried  like in the video but the setiing like shown in the video is mising  A5 frt. Sesn. Drv

 

[mtl]

Forget it and move on.

You cannot change this on your car.

[Dtc2010]

Oh no😭

[Antera]

On 07/11/2019 at 01:28, Bap33 said:

Hi all,

 

I've heard about a hidden "snow mode" for AWD version. It's available as standard on Kodiaq 4x4 with DCC:

 

Official short description here : https://www.skoda-storyboard.com/en/kodiaq_int_0006/

 

It seems it could be activated on Superb 4x4 too. Does anyone know how?

Thanks.

 

 

yes this is not simple coded with VCDs but is hardcoding in the system. My made on his GTe have this also including race option. 

[Bap33]

@Antera Can you tell us more? If not possible with VCDS, is this achievable with VCP for instance?

Thanks !

Edited 15 November, 2019 by Bap33

[Antera]

This is done with log in in the heart off the system. It'ss not simple and only for the one's who have a lot off programming skills in the systems from VAG. 1 thing wrong and you brick the system

[Bap33]

@AnteraOK. Then I'll wisely forget it !  

[RichTea77]

Does anybody now how to make the wipers park when you turn the ignition off?  i.e. return to the bottom of the screen.

Sorry if this has already been posted but I can;t seem to find it.  I can find out how do do it on an Octavia, but it doesn't seem to be the same on my car - 2015 Superb L&K.

 

Thanks

[Alx21]

On 07/11/2019 at 02:28, Bap33 said:

Hi all,

 

I've heard about a hidden "snow mode" for AWD version. It's available as standard on Kodiaq 4x4 with DCC:

 

Official short description here : https://www.skoda-storyboard.com/en/kodiaq_int_0006/

 

It seems it could be activated on Superb 4x4 too. Does anyone know how?

Thanks.

Hello,

 

"Snow mode" is present also on Kodiaq 4x4 without DCC.

 

 

 

[Chazzy]

13 hours ago, RichTea77 said:

Does anybody now how to make the wipers park when you turn the ignition off?  i.e. return to the bottom of the screen.

Sorry if this has already been posted but I can;t seem to find it.  I can find out how do do it on an Octavia, but it doesn't seem to be the same on my car - 2015 Superb L&K.

 

Thanks

I asked this a while ago. There is a short piece in the Octavia area i found not sure where now.  My wipers stop instantly on ignition off, neighbours one, same model year, always parks!! Skoda master tech said its a deliberate thing so you can set the wipers parked vertical if its snowy/ icy to free them from the screen more easily before engine on.  Hmmmm. 

[rtj70]

You can tell the car to put the wipers in the clean/replace position when you're turning the ignition off - if you remember. Something like press down on wiper stalk just after you turn the ignition off.

[JR RS]

5 hours ago, rtj70 said:

You can tell the car to put the wipers in the clean/replace position when you're turning the ignition off - if you remember. Something like press down on wiper stalk just after you turn the ignition off.

 

.....and before u open the driver's door

[facet edge]

13 hours ago, Chazzy said:

I asked this a while ago. There is a short piece in the Octavia area i found not sure where now.  My wipers stop instantly on ignition off, neighbours one, same model year, always parks!! Skoda master tech said its a deliberate thing so you can set the wipers parked vertical if its snowy/ icy to free them from the screen more easily before engine on.  Hmmmm. 

You're right. If other manufacturers can do it why can't they?

Even my Focus parked the wipers properly and there was a facility to put them in a vertical position.

[Guest matisere]

On 18/11/2019 at 10:39, RichTea77 said:

Does anybody now how to make the wipers park when you turn the ignition off?  i.e. return to the bottom of the screen.

Sorry if this has already been posted but I can;t seem to find it.  I can find out how do do it on an Octavia, but it doesn't seem to be the same on my car - 2015 Superb L&K.

 

Thanks

 

Hi, you can try this.

It's OK on my MY17

 

STG 09 > Codierung > Wischer (WWS) > Byte 01 > Bit 4 deaktivieren

[RichTea77]

On 19/11/2019 at 19:22, matisere said:

 

Hi, you can try this.

It's OK on my MY17

 

STG 09 > Codierung > Wischer (WWS) > Byte 01 > Bit 4 deaktivieren

 

Thanks @matisere I'll try it later and report back.

[aratic]

Hi all,

 

I have a MY19 Superb 206 with virtual cockpit. In the view that has the large centred tacho there is a power/kw bar to the left which gives the current power reading (and max is 206kw). Is there a way I could change this to boost with OBDeleven? It seems this part of the virtual cockpit can not be customised through the vehicle settings on Columbus. 

[MartiniB]

Weren't happy about Xenons switched automatically off only in summer months
by my taste that aren't so dark time - Riga 14:35 no the darkest December day

14:39

on Russian Tiguan's(MQB) forum found coding for that
https://www.drive2.ru/l/498312139799265393/
https://forum.tiguans.ru/showthread.php?p=1824068#post1824068
Controller 09 - Central Electronics
_ _ Long coding
_ _ Subsystem: RLHS
_ _ _ _ old: 1EA8DD (Tiguan 5Q0 955 547 B )
_ _ _ _ old: 00885D (Octavia)
_ _ _ _ old: 0088DF (Superb 2016 5Q0 955 547 A)
_ _ _ _ new:
_ _ _ _ 3СА8DD — DRL switches to Xenon about at 1200lx
_ _ _ _ 3CA8D7 — DRL switches to Xenon about at 800lx
_ _ _ _ 3СА8D2 — DRL switches to Xenon almost by sunset times
i choose last one

 

also have changed temperature threshold when ice warning comes
Adaptation
_ _ Control unit: 17 Dash Board
_ _ Name: outside_temperature
_ _ Values:
_ _ _ _ p_ice_warning_entry_temperature:
_ _ _ _ _ _ Old value: 4 °C
_ _ _ _ _ _ New value: 2 °C
_ _ _ _ _ p_ice_warning_exit_temperature:
_ _ _ _ _ _ Old value: 6 °C
_ _ _ _ _ _ New value: 3 °C

 

[rrozbroj]

Hello,

Deactivation of stupid sound when ignition on and open driver door doesn't work at superb 2019, can somebody help or explain why it is doesnt work anymore ? :/

[orukas]

On 22/12/2019 at 17:19, MartiniB said:

Weren't happy about Xenons switched automatically off only in summer months
by my taste that aren't so dark time - Riga 14:35 no the darkest December day

14:39

on Russian Tiguan's(MQB) forum found coding for that
https://www.drive2.ru/l/498312139799265393/
https://forum.tiguans.ru/showthread.php?p=1824068#post1824068
Controller 09 - Central Electronics
_ _ Long coding
_ _ Subsystem: RLHS
_ _ _ _ old: 1EA8DD (Tiguan 5Q0 955 547 B )
_ _ _ _ old: 00885D (Octavia)
_ _ _ _ old: 0088DF (Superb 2016 5Q0 955 547 A)
_ _ _ _ new:
_ _ _ _ 3СА8DD — DRL switches to Xenon about at 1200lx
_ _ _ _ 3CA8D7 — DRL switches to Xenon about at 800lx
_ _ _ _ 3СА8D2 — DRL switches to Xenon almost by sunset times
i choose last one

 

also have changed temperature threshold when ice warning comes
Adaptation
_ _ Control unit: 17 Dash Board
_ _ Name: outside_temperature
_ _ Values:
_ _ _ _ p_ice_warning_entry_temperature:
_ _ _ _ _ _ Old value: 4 °C
_ _ _ _ _ _ New value: 2 °C
_ _ _ _ _ p_ice_warning_exit_temperature:
_ _ _ _ _ _ Old value: 6 °C
_ _ _ _ _ _ New value: 3 °C

 

I have Superb 2016 (Superb 2016 5Q0 955 547 A) and the RLHS code is 1EA8DD, not 0088DF as you mentioned in the post above. Can I use 3СА8D2 ?