6 hours ago, EduardDo said:

The vcds I have is a clone one

Don't expect any help from Ross-Tech or on here when using your illegal rip-off clone of VCDS.

1 minute ago, PetrolDave said:

Don't expect any help from Ross-Tech or on here when using your illegal rip-off clone of VCDS.

For a hobbyst like me is not worth to pay 800 Euros or God know how much for a full vcds

6 minutes ago, EduardDo said:

For a hobbyst like me is not worth to pay 800 Euros or God know how much for a full vcds

I'm also a hobbyist, and I don't know where you get 800 Euros from, the real price for a 3 VIN licensed cable suitable for a hobbyist is GBP222 which is €255.

Still a lot... For that money I could go to a garage and do a full ambient light retrofit with a app while getting the full car cleaned... Or do 2 full service changes to the car

But still I am aware of the limitations of a clone, and I acknowledge that I won't get support from Ross Tech

7 hours ago, EduardDo said:

So sad to learn you can't diy your car anymore, my car has SFD 1 and even with obdeleven I don't know if I can unlock itt and the swap to vcds to do the adaptations

The vcds I have is a clone one bought it with 40 Euros , but another 150 Euros for obdeleven just to unlock sfd once ?? It's a lot

You dont need vcds, when you have OBD 11 Pro

1 hour ago, EduardDo said:

Still a lot... For that money I could go to a garage and do a full ambient light retrofit with a app while getting the full car cleaned... Or do 2 full service changes to the car

I've had VCDS for well over 10 years and it's paid for itself many tmes over with £100 in garage fees saved everytime I (or friends) have needed a fault diagnosis.

Hi everyone, I have retrofited my Skoda Kamiq to install the BSM. I have installed the same radar ( 2Q0 907 686 H / 685 H ) and impossible to remove component protection with Odis online.

I see on another forum the H versions are very difficult to install by retrofit due to SFD2

Anyone have a ideas ?

Day of Production from the Car?

VIN?

3 minutes ago, Cairus said:

Day of Production from the Car?

VIN?

Production 31/01/2023 and my VIN is : TMBGK6NW5P3092109

Which Error Code have Odis ?

Edited 6 October, 20256 Oct by Cairus

I don't take screenshots from ODIS but on OBD11:

When we try with my colleague on Odis, the option to remove component protection doesn't appear

4 hours ago, Vincent_83 said:

Hi everyone, I have retrofited my Skoda Kamiq to install the BSM. I have installed the same radar ( 2Q0 907 686 H / 685 H ) and impossible to remove component protection with Odis online.

I see on another forum the H versions are very difficult to install by retrofit due to SFD2

Anyone have a ideas ?

Wrong radar... H is for UNECE vehicles

Fit B instead

Edited 6 October, 20256 Oct by East_Yorkshire_Retrofits

For Index B I have the note until production date 21.06.2021. If it is Index E in my opinion

Installation periods for the Kamiq


A B are for MQBx
D E G H K are for MQBevo & MEB

A & B do not have component protection

Edited 6 October, 20256 Oct by East_Yorkshire_Retrofits

Until Index B, the Power ist KL15

I have the same information, B is for Kamiq mk1 and HJ for Kamiq mk2.

Not others.

For the power, since 2019, these modules are powered by KL15a and not by KL30 (as recent car for Exit warning into the door IThink).

For my Kamiq, I followed the official Skoda documentation (see attachment)

Is it possible to "downgrade" the H version into B compatible with MQB ?

If not, I'll order 2 versions B and I have to sell the H versions 😁

Lane Change Assist 7Y1.pdf

Until Index B it is Kl15

1 minute ago, Cairus said:

Until Index B it is Kl15

For H versions installed on Kamiq 2024, the schema show also KL15, are you sure ?

Edited 6 October, 20256 Oct by Vincent_83

I Connect every Control unit With Index B on KL15

1 minute ago, Cairus said:

I Connect every Control unit With Index B on KL15

And you're right, it's the good line.

I just have see the schema for 2025 Octavia and it's on KL30a.

But Kamiq is KL15a (I don't know if the new Kamiq is MQB or MQBEvo)

I just found on Ovoko 2 radars version B compatible with my Kamiq.

Maybe just the correct Dataset to be installed for Kamiq and I think it will be ok.

I'll inform you soon

On 06/10/2025 at 18:47, East_Yorkshire_Retrofits said:

Wrong radar... H is for UNECE vehicles

Fit B instead

Is it H good for my 2022 FL Karoq?

12 minutes ago, Benja77 said:

Is it H good for my 2022 FL Karoq?

I have 2 version H if you want 😅😅😅

Normaly Index B