Everything posted by UndertheRadar
-
Streaks in Passenger side windows
As above, It looks like a wash product thats been hit by hot direct sunlight and dried/etched itself to the glass. I had some on the glass on mine when it arrived. I removed it with a foam cutting pad and DA polisher. A polish with a half decent cutting ability should shift it from the glass. You could also try a medium cut wool pad to shift it quicker.
-
What have you done to your Superb III today?
-
Water ingress into wheel well
are you sure the water is not leaking through the tail light and running down the sealant to the boot floor?
-
help finding a new bike
Looks really well. Hope it brings you many miles of happiness.
-
272 tsi stage 1
No. All good.
-
Classic Cars
The 800 vitesse was a very underrated car. They were a great driving good going thing. I’ve had an FDH coupe sitting in the garage for the last nearly 15 yrs. never take it out but still runs very well.
-
Photography Thread
-
help finding a new bike
Posted on gumtree up here. Seems it has a few marks from use on the frame and dent on rear rim. still a decent carbon bike after some tlc though.
-
2015 Silver Hatchback : How Many Different Silver Paint Codes?
don't know about 2015, but a mate told me not to hit mine (also silver), as he'd had to sort through 9 shades of the same colour on a 2018 superb.
-
Injector order
check and see if the system is holding vacuum pressure.
- Urgent help 🆘
- Urgent help 🆘
- Urgent help 🆘
- Urgent help 🆘
-
Retrofit Heated Washer Nozzles
You'd need to mix it stronger anyway, even with the heated washers. I have them on mine and they're sh............ not awesome!!
-
Parts For Sale: Racingline R600 Intake System for MQB Platform with foam filter
Are you happy enough to post to N.I?
-
Injector order
It runs in order. 1 then 2 then 3 then 4. The injector numbering should not be confused with the firing order of those injectors though. But if you have a scanner saying injector ? faulty, then *1 is first from left, *2 is second from left, *3 is third from left, *4 is fourth from left.
-
Injector order
numbered from timing belt to flywheel. 1 is far left in pic, 4 is beside oil filler cap.
-
Noise help
does the noise change when your cornering?
-
Dash rattle
Rattles in doors on both sides of mine were from grill trim just above the door panel. I padded them very lightly. Just enough to stop them rubbing off the door panel. One of my other buzzing noises was coming from the clocks, where it meets the dashboard. Again, padded and refitted. To be honest, this car just seems to like making new noises, like it thinks I’m bored possibly.
-
Paint damage -how bad?
That looks more like etching from bird ****. I’d leave it with them to sort, as I’ve seen marks like that before that just won’t come out completely.
-
Red Sportline Estate paint chips - advice please
Panel wipe the bonnet. Then touch them all in with your colour mix and a toothpick. Should key better and stand up to a power hose when washing.
-
Beginners advice!
The dry and shine is fine. I’ve my lot coated with race glaze pro ceramic. So all your doing is topping up a quick spray wax over the coating. Your not getting near the paint. You don’t want anything with any sort of abrasives in it. I use Rupes Uno protect every few months over mine. It’s applied with a white foam finishing pad at speed 1 on the DA. The main reason for this is to help maintain the longevity of the coating and to aid beading and self cleaning properties. some of those so called spray ceramics are a PITA as they streak when applied. The spray and shine is a simple spray on wipe off product that lasts well. Britemax spray and shine is another good product for this sort of use. Buy some very nice, very soft cloths. Spray on and apply with one. Go over with another clean one to wipe off. Then go over the entire car with a third when finished. That’s my procedure anyway. 👍🏻
-
how to freshen up chrome window trim outside and plastic trim inside
Yes. Very much so. I’ll be using Autoskins N.I to do mine.
-
how to freshen up chrome window trim outside and plastic trim inside
I’m still trying to arrange getting all my chrome wrapped in gloss black on my L&K. Just need the time. Maybe when the school holidays start.