Skip to content

Amundsen MIB2 Firmware Update

Featured Replies

@pab567 Could you provide an update for the following please:

P/N: 5Q0035874C

HW: H41

SW: 0472

  • Replies 4.6k
  • Views 767.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • All others pls check your PM for SW download links

  • I beleive what you have is the latest version

  • I have upgraded multiple units from 0478 to 0480 and have NEVER had any issues @Fix666 check your PM for download link

Posted Images

Download link on PM

Hi There could you help with the update file for this Skoda Octavia 3 headunit?

 

Thank you

 

PXL_20250222_191946979.jpg

PXL_20250222_192005728.jpg

Hi,
also need an update for my Bolero HeadUnit.
Thank you very much for your help.
image.thumb.jpeg.3fa46861cd5fc5ad67b460aa2ffcecf4.jpeg

IMG_20250223_105018.jpg

Hi @pab567, please could you advise whether there is an update for my 2013 Octavia 3 VRS infotainment unit?

 

I've had the generic "Fault : Vehicle Lighting" error on the display for several months which a few people seem to have reported. Checked and reseated all bulbs. Nothing showing on my OBD but don't know anyone with VCDS. Have seen a few suggestions on here that updating the infotainment might be worth a try?

 

image0.jpeg

@Superlolli you are already on the latest firmware. ALl others pls check your PMs.

@pab567 Could you provide an update for the following please:

20250223_162557.jpg

20250223_163707.jpg

20250223_163716.jpg

Edited by NuriDark0
mark

PM

Hi,  I need firmware update: MST2_EU_SK_ZR_P0253T

 

Thank you very much!

Good momrinng all

 

I hope someone can help. I bought a 2015 Octavia last week and the original maps are still installed. I'd really like to update to the latest. I have downloaded them from the Skoda portal and installed them on a new SD card. However, I get an error message "Please insert a data medium with valid navigation data". I also went to MIB helper and downloaded from there with the same result. Can someone tell me what I am doing wrong? Thank you

 

34327211-26A9-433B-91DF-EDD773A4B62C_1_105_c.thumb.jpeg.1e3ac3e811030e1b040dd08c1450d7a7.jpeg

IMG_5241.jpeg

IMG_5239.jpeg

IMG_5244.jpeg

51 minutes ago, Hobgoblinrunner said:

Good momrinng all

 

I hope someone can help. I bought a 2015 Octavia last week and the original maps are still installed. I'd really like to update to the latest. I have downloaded them from the Skoda portal and installed them on a new SD card. However, I get an error message "Please insert a data medium with valid navigation data". I also went to MIB helper and downloaded from there with the same result. Can someone tell me what I am doing wrong? Thank you

 

34327211-26A9-433B-91DF-EDD773A4B62C_1_105_c.thumb.jpeg.1e3ac3e811030e1b040dd08c1450d7a7.jpeg

IMG_5241.jpeg

IMG_5239.jpeg

IMG_5244.jpeg

Have you used the proper SD card? - Amundsen MIB2 will only accept Skoda/VAG SD card.

Hi,

 

I am new here. Are you able to provide me with a link for that firmware: MST2_EU_SK_ZR_P0480T ?

 

Currently installed v. P0478T.

Part#: 5Q0035874C

Hardware: H41

 

Would like to update to v 480..

 

Thanks in advance!

Hello , please update the last equipment 5Q0035874C
 hardware H41
 software 0471
Děkuji

Hi,

 

First time post. Thanks in advance.

 

Can someone point me to an update for same equipment as above post please and thanks.

 

Regards, Stephen

Screenshot 2025-02-28 143837.png

Screenshot 2025-02-28 143856.png

Screenshot 2025-02-28 143922.png

Dear friends, this is my first post on this forum, and what I have seen reading the comments, this is a place to learn and find a lot of help. Before I start, I want to thank everyone here for helping and exchanging experiences.

Recently I bought Škoda Octavia (2017 year). First of all, I want to tell you that I don't have experience at all with updating firmware of car console (software).

I can see that mr. @pab567 is a true legend here :) and I would really appreciate if you could help me with this problem.

I am attaching you the pictures of my version of software that is installed right now in my car. I hope you will get along with the language, I think that the versions are what you need to see.

Can you help me with all the procedure regarding the update? I am very grateful to you in advance!

Best regards!

IMG_1445.JPG

IMG_1446.JPG

IMG_1447.JPG

Hi All,

Looking for an update for my Infotainment.

I did request one around 1 year ago and was kindly provided a file by Pab567.

I downloaded it onto an old computer and totally forgot about it. I've went back into my messages and downloaded it to try and put it onto an SD Card(formatted to FAT32). But gives file errors when I'm trying to transfer the files.

I've even tried unzipping direct to the SD and still gives the same errors.

Any help would be greatly appreciated.

The file I'm trying to copy over is called MST2_EU_SE_ZR_P0368T

20250304_154510.jpg

Not sure why the image is upside down. 🙃

On 26/02/2025 at 10:07, Warrior193 said:

Have you used the proper SD card? - Amundsen MIB2 will only accept Skoda/VAG SD card.

Thank you @Warrior193 I hadn't realised there was a difference. I thought I could just use a freshly formatted card. All sorted now.

Hello. I am new here.

Could you please help me with a software update ?

IMG_9258.jpeg

IMG_9256.jpeg

@karp Feel free to write to me.

On 04/03/2025 at 17:26, Octy6614 said:

Hi All,

Looking for an update for my Infotainment.

I did request one around 1 year ago and was kindly provided a file by Pab567.

I downloaded it onto an old computer and totally forgot about it. I've went back into my messages and downloaded it to try and put it onto an SD Card(formatted to FAT32). But gives file errors when I'm trying to transfer the files.

I've even tried unzipping direct to the SD and still gives the same errors.

Any help would be greatly appreciated.

The file I'm trying to copy over is called MST2_EU_SE_ZR_P0368T

20250304_154510.jpg

Hello the update you try to copy si for Seat "SE" you need 369 SK is for škoda. I can send you link.

Is there an update foor my car?

SW MST2_EU_SK_ZR_P0480T

I have the 0:00 clock error described by many skoda/seat/vw drivers now with my yeti, too.

My unit is:

Partnumber: 5L0035680D

SW Train: MST2_EU_SK_PQ_E0368T

As I read this 0:00 clock bug should be fixed in Version 478 (and later).

@pab567: Could you kindly provide me an bugfree(d) update for my device?

btw:

my software-version seems strange because I found in the web version 359 shall be latest.

is there something wrong?

Thank you in advance.

14 hours ago, g0rbi said:

I have the 0:00 clock error described by many skoda/seat/vw drivers now with my yeti, too.

My unit is:

Partnumber: 5L0035680D

SW Train: MST2_EU_SK_PQ_E0368T

As I read this 0:00 clock bug should be fixed in Version 478 (and later).

@pab567: Could you kindly provide me an bugfree(d) update for my device?

btw:

my software-version seems strange because I found in the web version 359 shall be latest.

is there something wrong?

Thank you in advance.

forgot to mention...

Hardware = X72, Software = X368

@pab567 could you provide me with an update for my navigation system? Thx in advance.

Media Codec 3141.0.0.1

IMG_6643.JPEG

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.