13 minutes ago, Yannmrt said:

I updated it to 1798 because I got this error (I tried at the beginning straight to 1800), so I tried upgrading steeply to see if it resolved the problem.

I got the two files (1798 & 1800) from the link found on this topic (https://disk.yandex.ru/d/1V1uBTc8ssc3zA). I'm unsure if the "1800" file was downloaded with an error or when I unzipped them, but I tried with a file from (https://mibsolution.one/) this morning, and it worked.

Thanks anyway for taking the time to reply and for giving the link.

 

For information, this upgrade (to the 1800 version) fixes my AA connection with my One Plus 11 5G EU.

 

Thank you to all who were involved in this topic 👌👍

Great to hear that finally you manage it. 

Hi everyone!

 

I just got a 2022 Scala with MIB3 8,25inches,

 

I cant connect to my S23+ on AA but I can connect with A15 so it does not make much sense, I've checked this happens to a lot of pple. 

 

I would like to know if I could update my bolero system and how to do so, this is my car information

 

 

 

Could you please let me know if my infointment is up to date or if there is any update I can apply?

 

If so, how could I do it?

 

thank you all!

 

It is said 1798 is less bugged than 1800

So, do i have the latest version available?

 

Im desperate because my s23+ is not connecting to my AA

22 minutes ago, felipelpc said:

So, do i have the latest version available?

 

Im desperate because my s23+ is not connecting to my AA

 

You don't have it as version 1800 is the newest one and it sorts out AA connection problems with Samsung 23 family of phones.

Now please read up the whole thread as it hides answers to all your questions

Where to download version 1800 from? What's the update procedure? Could something go wrong? etc...

Fixed it!!

 

I got 1800, thank you all!

 

Last thing... it would be possible to have wireless AA or in this version is impossible?

 

Thanks in advance

You can activate wireless android auto via obdeleven but you need to check your swap codes in the unit. 

Have you got any tutorial or how I could check if my car is able or not to update to AA wireless?

37 minutes ago, felipelpc said:

Have you got any tutorial or how I could check if my car is able or not to update to AA wireless?

https://youtu.be/TdPE2KLFUzg?si=Wjj41nAmX0vlnyCz

Sorry i dont understand a thing 🙄

 

I've checked with bolero there is no AA wireless, but i've seen some people that has achieved to have it.. dont know how

2 hours ago, felipelpc said:

Sorry i dont understand a thing 🙄

 

I've checked with bolero there is no AA wireless, but i've seen some people that has achieved to have it.. dont know how

Try to turn on cc In YouTube. Normally it's translated. 

Edited 6 December, 20241 yr by KomisPL

Hi There,

 

Can someone help me with some questions? I am very new to this field of science

 

I have a skoda kamiq my 11/2019 with bolero sound system and SmartLink wired. 

SW Train: MEN3_EU_SK370_P949P

MU SW: 464

TG#: 654035871B

HW: 040
SW: 0464

 

My first question is. Am I able to unlock SmartLink wireless with this hardware?

And if I am able to are there any Prerequisites i have to prepare to make this happen?

Thing is, I went to my skoda partner and they told me a lot that i dont buy yet. About I have to change the control-unit and that there is no software update for this bolero and my2019...

 

For any help I would be very graeful.

Hello, could you please help me with a software update for a 2018 Skoda Octavia? The current version is MST2_EU_SK_ZR_PO468T, but Android Auto does not work with it.

 

Thank you very much in advance.

Edited 15 December, 20241 yr by vitalie

Buongiorno a tutti ho una Skoda scala del 2020, vorrei aggiornare il software del mio Bolero perché non riesco a collegare Android auto con il mio smartphone Android Oneplus 11 5g. Vi invio le foto del hardware e del software che monta la mia vettura. Non procedo subito con l'aggiornamento avente il nr. 1800 perché non ho ben capito se è compatibile 

On 01/12/2024 at 07:09, kligli said:

Hello, does TPMS work for everyone on firmware 1800? I have a menu displayed as in the screenshot. When the pressure drops, it is not displayed in the menu

I have exactly the same problem. I have managed to reach version 1790 but the TPMS doesn't work now. I try to set the Pressure and save, it says that they are stored but it again says that you need to store your pressures...

Hello everyone, maybe someone can help with MIB3, after updating from version 0469 to 0741, the system started to reboot constantly, the sound disappeared, bt and WiFi work, but I can't roll back or update to another version because the system reboots sometimes I have time to start reading the meta sometimes the reboot is already at the stage of selecting a folder on the USB, if you do not touch anything, then after a couple of reboots it starts the update which ends with SWDL error 30 when trying to repeat or skip the same thing if you press cancel or abort then the system reboots into a window where it requires confirmation of the update with diagnostic equipment if you confirm or in this window press cancel then the system reboots and the reboot cycles start over in the update logs at first there was an installation with OK statuses, then a big pile with NOK statuses, has anyone encountered something similar or at least suggests where to look for the error

On 19/05/2024 at 23:42, mk1610 said:

can you provide 0469 version files ?

BTW , 0741 was the version the official service center installed on my unit 1 year ago after service ( back them i wasn't aware of this wonderful forum ) 

hi, how you fixed it?

Hello. Can anyone share a working version of the 1800, please? 

Thank You in advance!

Hello! There is such a file. Size more than 300 MB. How can I share it?

¿Mega? And share it

My car has the 1800 version installed correctly download file  (MEN3_EU_SK370_P3355L_1800)  pass: 22822

On 06/01/2025 at 14:57, rs_engineer said:

Hello everyone, maybe someone can help with MIB3, after updating from version 0469 to 0741, the system started to reboot constantly, the sound disappeared, bt and WiFi work, but I can't roll back or update to another version because the system reboots sometimes I have time to start reading the meta sometimes the reboot is already at the stage of selecting a folder on the USB, if you do not touch anything, then after a couple of reboots it starts the update which ends with SWDL error 30 when trying to repeat or skip the same thing if you press cancel or abort then the system reboots into a window where it requires confirmation of the update with diagnostic equipment if you confirm or in this window press cancel then the system reboots and the reboot cycles start over in the update logs at first there was an installation with OK statuses, then a big pile with NOK statuses, has anyone encountered something similar or at least suggests where to look for the error

 

741 is incomplete firmware. Right after the update to 741 you start update to SW742....

 

 

Hello, friend of mine have Scala 2019, and he have this firmware installed:

SW Train: MEN3_EU_SK370_P9305P
Software (or MU SW): 0463.

MIB helper is showing that latest firmware is MEN3_EU_SK370_P1185L (MU: 1760) but i saw on this forum that MEN3_EU_SK370_P2345L_1790 could be good too. Can you please help me and share correct one (might be on PW) @varooom? Thanks in advance

@andreiro221 can you help me please? I think i need  SW0469 -> then SW741 + SW742 and update to 1800 is off limits as it is 2019 version. May I ask you for firmware?

Hi, I have upload for you fw469 fw741 and fw742. Please be aware that all updates you will do on your own risk, even risk of brick unit. First question you need to ask yourself is: do I really need an update ?

 

Good luck. 

 

https://easyupload.io/xlhs1d