VCDS options on Superb III

[Antera]

On 11-3-2017 at 04:16, knfruitbat said:

Is there a Trailer Assist function available anywhere? If so is there any hardware that is required? Getting Factory fitted Tow Bar and Rear View Camera on a new L&K Estate.

 

It is possible with buying and installing the right Camera en PDC module. 

[grenness]

16 hours ago, Antera said:

 

It is possible with buying and installing the right Camera en PDC module. 

Do you have more details or links?

 

[gony]

I just purchsed vcds and got through the forum.. I have my17 with a5 camera and want to activate lane assist, traffic sign recognition, refuel quantity.

 

can someone be so kind and help an newbie like me

[Gizmo]

 

[oddvaoes]

 

23 hours ago, grenness said:

Do you have more details or links?

 

You can look at this link. I found it yesterday. http://vagcars.dk/phpbb/viewtopic.php?f=98&t=123584

You must have high quality rev. camera and Pdc controler 5Q0919298C or L.

I have this in my superb MY 2017: 5Q0919298C

Edited 1 April, 2017 by oddvaoes

[gony]

10 hours ago, Gizmo68 said:

 

 

Thank you Gizmo. However i could not find the lane assist activation in the thread? I am missing something ? 

[Antera]

On 31-3-2017 at 12:47, grenness said:

Do you have more details or links?

 

Not yet. One on the dutch forum have this enabled somewhere in germany and toled us only this.

[grenness]

Does anyone know the security code for 6C Back-Up Camera?

 

[Enriquez]

20103

[gony]

Ok let me inform regarding my results  i have activated refuel quantity, offroad mode, throttle response to audi, lane assist, door lock on slam etc.

 

i have activated also traffic sign recognition however i have following remark ( see photo).

 

i dont know what the problem is. Does anyone have experience for this?

 

Worth to mention that i did not activate the following code hence there were no option in my superb

 

Controller A5 (Front / front view camera)

07 - Coding

Byte 1

Bit 0 Enable - "01 traffic sign recognition (FTE) active"

 

 

 

[Nazmi]

19 minutes ago, gony said:

Ok let me inform regarding my results  i have activated refuel quantity, offroad mode, throttle response to audi, lane assist, door lock on slam etc.

 

i have activated also traffic sign recognition however i have following remark ( see photo).

 

i dont know what the problem is. Does anyone have experience for this?

 

Worth to mention that i did not activate the following code hence there were no option in my superb

 

Controller A5 (Front / front view camera)

07 - Coding

Byte 1

Bit 0 Enable - "01 traffic sign recognition (FTE) active"

 

 

 

A bit off topic from your question but I want to know how to activate off road mode? 

[gony]

4 minutes ago, Nazmi said:

A bit off topic from your question but I want to know how to activate off road mode? 

 

You can follow the instructions in the following link 

 

[Gizmo]

gony have you tried driving the car?

Not all roads have TSR data for them. 

[gony]

2 minutes ago, Gizmo68 said:

gony have you tried driving the car?

Not all roads have TSR data for them. 

 

Yes gizmo i tried driving the car in city and in highway. I also pass the border to see if it will work in neighbor country but no luck. I have passed several road signs though. I don't know if is something related to the region or something is missing in my coding. 

[Nazmi]

11 hours ago, gony said:

 

You can follow the instructions in the following link 

 

I see, I know the off road display but I thought you enable off road driving mode like eco, comfort, sport.

[mtl]

14 hours ago, gony said:

 

Yes gizmo i tried driving the car in city and in highway. I also pass the border to see if it will work in neighbor country but no luck. I have passed several road signs though. I don't know if is something related to the region or something is missing in my coding. 

Were you in Serbia? Because in Serbia TSR does not work. Tested.

[gony]

2 hours ago, mtl said:

Were you in Serbia? Because in Serbia TSR does not work. Tested.

 

In fact i am in Kosova and also traveled to Albania to see if something changes. I will give a try to Macedonia or even to Bulgaria or Greece in next weeks. But i was sure that was something that i have done wrong and not something region related 

[mtl]

If you will go to Croatia try it there, in Croatia definitelly works.

[mitchec]

On 12/24/2015 at 19:56, Gizmo68 said:

TSR coding (VCDS needed)

Recently purchased a 2016 L&K 190 DSG with no additional optional extras (note it does have Lane assist and Sat Nav as standard)). I have been looking at this thread and thought it would be a good idea to add a few myself so purchased a HEX-V2

 

So far only tried TSR coding but not having any luck

 

following guide i'm getting some irregularities

 

step 1 & 2

Controller 5F (Information Electrical)

10 - Adaptations

Select channel: (63) Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 & Channel: (151) Car_Function_Adaptations_Gen2-menu_menu_display_road_sign_identification

 

Mine are showing slightly different but both activated OK

 

Step 3

Controller A5 (Front / front view camera)

07 - Coding

Byte 1

Bit 0 Enable - "01 traffic sign recognition (FTE) active"

 

Not having any luck with this at all. Firstly it doesn't show as 'Front /Rear cameras' and is displayed as 'Frt Sensor. Driver Assist'. After selecting as instructed am getting the the following. 

 

 

As you can see there is no option to select anything on Byte 1. I have checked through all other options on this controller and there is nothing resembling 01 coding_VZE Coded. I did consider changing Byte 1 value from 4 to 5 which would set bit 0 to 1 but didn't in case it messed something else up. On checking Byte 0 as instructed it just gives you a list of different VAG car models, though Skoda Superb Limousine  & Combi was on the list.

 

Step  4

Controller 17 (Instruments)

07 Coding

Byte 5

Bit 2 Enable - "Traffic Sign Recognition installed"

 

Selected bit 2 as instructed and this activated OK but got the following message on the maxidot

 

 

each of the other steps appeared to go OK but the end result is its not working. Any suggestion would be gratefully received.

 

 

[gony]

On 4/9/2017 at 10:35, mtl said:

If you will go to Croatia try it there, in Croatia definitelly works.

 

I will definitely give a try. Finger crossed:)

[djduese]

TSR on Superb 3 is in Controller A5 not in byte 0!!

 

TSR must be activated in byte 16 bit 4. 

If you change something in the first 4 bytes in Controller A5, in worst case, you delete the calibration of the camera

[fl0riz]

Hi everyone,

 

I read some things in this thread about the 'audi throttle setting' with the 1.4 DSG.

 

I am experiencing issues as well with my S3 combi 1.4 DSG.

For a couple of times already, my cruise control (I don't have ACC) failed during driving. Sometimes it failed while it was on, and sometimes it wouldn't even start.

I've checked the logs via VCDS, and I see that this error is logged:

 

Address 01: Engine (J623-CZEA)       Labels: 04E-907-309-V1.clb

   Part No SW: 04E 906 027 BT    HW: 04E 907 309 AB

   Component: R4 1.4l TFS   H23 9177 

   Revision: R9H23---   

   Coding: 0225003223241D087000

   Shop #: WSC 12345 123 12345

   ASAM Dataset: EV_ECM14TFS01104E906027BT 001011

   ROD: EV_ECM14TFS01104E906027BT.rod

   VCID: 77FA309ECE5604F9D8-8022

 

   CAN Converter 01:

 

1 Fault Found:

17150 - Databus

          U1122 00 [032] - Implausible Message

          Intermittent - Not Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 2

                    Fault Frequency: 6

                    Mileage: 2508 km

                    Date: 2017.03.27

                    Time: 14:50:11

 

                    Engine speed: 2246.50 /min

                    Normed load value: 9.4 %

                    Vehicle speed: 123 km/h

                    Coolant temperature: 95 °C

                    Intake air temperature: 42 °C

                    Ambient air pressure: 1010 mbar

                    Voltage terminal 30: 13.735 V

                    Unlearning counter according OBD: 40

                    Acceleration: -0.304 m/s²

                    Cruise Control System (CCS): status-Bit 0: 3

                    Drivetrain coordinator: ACC fault status-Bit 0: 0

                    Drivetrain coordinator: ACC fault status-Bit 8: 0

                    Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 0: 0

                    Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 16: 0

                    Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 24: 0

                    Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 8: 0

                    Drivetrain coordinator: brake fault status-Bit 0: 32

                    Accelerator pedal travel: 0.00 %

 

Readiness: 0000 0000

 

 

Does anyone experienced the same? When the car is completely shut down and started again, it all works fine again (until the error hits again).

 

What I also found in the logs, is this strange error on my ABS:

 

Address 03: ABS Brakes (J104)       Labels: None

   Part No SW: 5Q0 614 517 CG    HW: 5Q0 614 517 AG

   Component: ESC           H62 0643  

   Revision: 00000000    Serial number: 60257000001675

   Coding: 1E076A9C34222374477B060040CA4978562CC4E2600292753021F0F8C282420000000012121212B835351919323200

   Shop #: WSC 33361 790 00165

   ASAM Dataset: EV_Brake1UDSContiMK100IPB 036010

   ROD: EV_Brake1UDSContiMK100IPB_035_SK37.rod

   VCID: 78F833A2C3480B81D1-802C

 

1 Fault Found:

8314 - Check Coding of ECUs on Powertrain Data Bus

          P1647 00 [009] - -

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 3

                    Fault Frequency: 86

                    Reset counter: 108

                    Mileage: 2337 km

                    Date: 2017.03.24

                    Time: 19:11:25

 

 

Again, no clue what this is. I don't think there is a real issue with my ABS (I also don't get a warning signal for this).

 

Any help is highly appreciated!!

[mitchec]

Finally got TSR working using Gizmo 68 instructions with a few changes. 

 

Forget the coding changes on Byte 1 in A5 there is no option anyway.

 

The only other change is in 

Controller 5F (Information Electr.)

07 - Coding

 

instructions state

Byte 24 Bit 6 - untick Traffic Sign Display (VZA) active

 

leave this TICKED

 

rebooted Columbus though not sure it's required and it seams to be working ok. 

 

Went for for a quick drive around the village. Alarm comes on at pre defined setting. No pics as not safe while driving. 

 

 

 

Edited 13 April, 2017 by mitchec

[mitchec]

Managed to enable the following 

 

Enabled Traffic Sign recognition.
Enabled high beam assist.Works great
Enable refuel quantity in the Maxidot.

Enabled Driving mode in Maxidot
Enable rear lights with DRL’s.
Enable DRL's in Menu.
Changed Ambient lighting from warm white to red. Looks great.
Changed throttle response to Audi. didn't notice any difference so switched back

[gony]

8 hours ago, mitchec said:

Finally got TSR working using Gizmo 68 instructions with a few changes. 

 

Forget the coding changes on Byte 1 in A5 there is no option anyway.

 

The only other change is in 

Controller 5F (Information Electr.)

07 - Coding

 

instructions state

Byte 24 Bit 6 - untick Traffic Sign Display (VZA) active

 

leave this TICKED

 

rebooted Columbus though not sure it's required and it seams to be working ok. 

 

Went for for a quick drive around the village. Alarm comes on at pre defined setting. No pics as not safe while driving. 

 

 

 

 

"Byte 24 Bit 6 - untick Traffic Sign Display (VZA) active leave this TICKED"

 

why leaving ticked? Any reason?