VAG-COM Software tweaks

[EmyKaroq]

3 hours ago, WilWord said:

Ciao, ho appena ricevuto il mio DSG SEL KOSK 1.5 Karoq lo scorso venerdì, ho ordinato OBDEleven Pro in arrivo per 2/5 giorni, useremo gli adattamenti, avrò la codifica per l'assistenza alla luce (luci abbaglianti in automatico) e l'inversione dello specchietto retrovisore posteriore inferiore destro ( partito per il Regno Unito). Grazie molto.

Ok If you need the guides I'll send them to you

[pa_ko]

12 minutes ago, EmyKaroq said:

Ciao, Italia e optional l'ho inserito al momento dell'acquisto, per cui c'è già la telecamera dietro lo specchio retrovisore. 

Grazie

 

So it supports conclusion that Road Signs work in most western EU countries while in the East and rest of the world they don't.

[Petr28316]

12 hours ago, pa_ko said:

 

Rozpoznávání silničních značek funguje ? V jaké zemi se nacházíte? Ptám se, jak vypadá, že v některých zemích není možné aktivovat silniční značky (je možné je aktivovat, ale nefungují spolu s daty s posádkou). Takže se snažím shromažďovat zkušenosti a zjistit, co se děje. 

road sign recognition works
Czech Republic

[WilWord]

13 hours ago, EmyKaroq said:

Ok If you need the guides I'll send them to you

Good morning, many thanks

[EmyKaroq]

Lane assist attivato 

[Tezaman]

Is anyone retrofited footwell lights ? i just did and i followed these commands and 

I can see the lights working along with the sallon lights, Open the door footwell 100% , close the door footwell off, 

open the lights footwell on.

 

but the slider in infortainment system makes no deference , it doesnt work.

 

EDIT : 

The cable of the positive wire , is connected to BCM 5Q0 937 084 CD

pin C 72

 

I believe that it have to be connected to another pin or there is another VCDS coding sequense

Controller 09 - Central Electronics
16 - Security Access - enter 31347
10 - Adaptations

Go to
 
 Leuchte30FR LC72-Lichtfunktion A 30
Change this value from ‘not active’ to ‘Footwell light’ from the dropdown menu
  
Leuchte30FR LC72-Dimmwert AB 30	= 100
Leuchte30FR LC72-Dimmwert CD 30	= 100
Leuchte30FR LC72-Fehlerort mittleres Byte DTC-DFCC 30	= 2
Leuchte30FR LC72-Lasttyp 30	= 36 - LED Kleinleistung 
Leuchte30FR LC72-Lichtansteuerung HD AB 30	= Always 
Leuchte30FR LC72-Lichtfunktion A 30	= Footwell light 
Leuchte30FR LC72-Lichtfunktion B 30	= Terminal 58xs dimmer 
Leuchte30FR LC72-Lichtfunktion C 30	= Interior Lights

 

Edited 10 February, 2019 by Tezaman

[Tezaman]

in the meanwhile there is also the B50 that some people use , 

i guess that the only way to make the Footwells light work , is if you enable this from MIB 

[Tezaman]

After more research i found this commands

 

Int. light, 2nd generation: weicher Farbwechsel: active

soft colour change-not neede

Int. light, 2nd generation: Instrumententafelbeleuchtung mehrfarbig: active

AID colour- needed

Int. light, 2nd generation: Mittelkonsolenbeleuchtung mehrfarbig: active

center console colour-not needed

Interior light, light configuration: Ambiente_Applikationsleisten_in_Instrumententafel: installed

needed

nterior light, light configuration: Mittelkonsolenbeleuchtung: installed

again Center console- not needed unless you have led in the Center console

Interior light, light configuration: LIN-Dachkonsole lokal aktivierbar: active

roof consol- not needed unless you have LED’s in the roof

Interior light, light configuration: Fussraumbeleuchtung is to enable footwell lights

Interior light, light configuration: Ambientemenue mit globalem aus: active

gives you a off button in background lighting to switch off door and footwell lighting

Interior light, light configuration: Ambientemenue mit alle Zonen: active

Adds the “background lighting” buttons in settings- needed

Interior light, light configuration: Ambient_Farbliste_HMI: active

gives you the colour slider at bottom of background lighting screen- needed

 

 

After that the Background Lighting Menu appeard but i have no control to dim the Footwell lights

anyone can help?

Edited 10 February, 2019 by Tezaman

[RedleH]

Tezaman, very good search you have.

I also intend to add footwell lights. Front and back. How did you add at the back?

The programming is the itch!

[Tezaman]

from the aliexpress suplier , i got a kit with a pre made wire harness , and 4 led lights

[RedleH]

The best way is for some one with footwell light from fabric, to share their scan, to confirm the configuration.

[RedleH]

8 minutes ago, Tezaman said:

from the aliexpress suplier , i got a kit with a pre made wire harness , and 4 led lights

How did you installed in the rear seats? I can’t find a place to fit them.

[Tezaman]

1 minute ago, RedleH said:

How did you installed in the rear seats? I can’t find a place to fit them.

i am preparing a 3D printed Bracket

ypu can order this also

 

565881547 Light Holder

Edited 11 February, 2019 by Tezaman

[Tezaman]

Today I did a proper restart on MIB by holding the button 10secs. And the slider come alive !!!!   I can dim the footwell lighhts as ambient lights while driving..!   The only thing now that I have to enable it's the graphics on the MIB that shows the intensity of the footwell light

[Tezaman]

15 hours ago, RedleH said:

How did you installed in the rear seats? I can’t find a place to fit them.

 

https://www.thingiverse.com/thing:3420703

 

Edited 11 February, 2019 by Tezaman

[RedleH]

Tezaman, great work!

[Gabi4]

What about the warranty? Could it be affected by using an aftermarket diagnose and coding tool?

Edited 3 March, 2019 by Gabi4

[Gizmo]

20 minutes ago, Gabi4 said:

What about the warranty? Could it be affected by using an aftermarket diagnose and coding tool?

 

Only if you used a cheap unreliable one that screwed the coding up requiring dealer help (at your cost)

 

Coding changes are only enabling things / different settings that are already built into / written into the software.

[Gabi4]

I just ordered an OBDEleven, and my father got concerned that it might affect the warranty.

I assume that OBDEleven uses data that VAG group allows them to use and to have access.

[Gizmo]

 

12 minutes ago, Gabi4 said:

I just ordered an OBDEleven, and my father got concerned that it might affect the warranty.

 

If you use the ‘1 click’ apps for coding then you will more than likely screw the coding up somewhere 

 

Do the coding ‘manually’ and you should be OK... just make sure you save a full scan / admap and you understand what you are changing BEFORE you make any changes.

 

12 minutes ago, Gabi4 said:

I assume that OBDEleven uses data that VAG group allows them to use and to have access.

 

Eerm not in the slightest!

[irfant]

Some codings are explained as follows:

 

Select STG 09 (vehicle power) STG Access Permission -> Function 16 Enter access code 31347 STG adjustment -> function 10 Channel ...

 

or 

 

Select STG 17 (instruments) STG adjustment -> function 10 Select channel display depiction 

 

Where is the STG menu or button? I am missing something. My VCDS is 18.9

 

 

 

Edited 13 March, 2019 by irfant

[LBFS]

Using obdeleven I've managed to activate (amongst other minor bits) rear DRLs and High Beam Assist and have increased the battery threshold for stop/start so it is effectively disabled. Disabling KESSY is an easy tweak which may interest a lot of you, too. 

[FabFabFabia]

Has anyone adjusted the air conditioning power to make the cabin cooler in the summer? Does this effectively lower the temperature a notch? The Karoq's aircon is not as cold as my previous Fabia was.

[agedbriar]

12 hours ago, LBFS said:

Disabling KESSY is an easy tweak which may interest a lot of you, too. 

How do you start the engine with KESSY disabled?

 

[LBFS]

18 minutes ago, agedbriar said:

How do you start the engine with KESSY disabled?

 

Sorry, should have been clearer. It disables the sensors on the front door handles - forcing you to use the lock/unlock buttons on the key. Handy for those who feel nervous about car theft using repeater boxes.