pab567

Link sent in PM

It's easy to get them on the display (by adjusting adaptation channels) but if FEC/SWaP code is not inactive or missing then it will not operate. Turn developer mode on, enetr service mode and check list of installed FEC/SWaP codes.

I sent you link to MST2_EU_VW_PQ_P0254T, just use it. All pls check your PMs.

Probably SmartLink is not enabled. Do you have any diagnostics tool to turn developer mode on?

PM sent

Indeed you need to change unit behind the screen (infotainment reader, glove box unit). New unit must be patched to enable new features. I can deliver such unit, in Plug&Play version - drop me a PM if you are interested.

@liljarman pls post VIN

PM sent

@kalamath sorry I missed part of the previous correspondence This FABIA has a SWING unit part number 6V0035869D - with DAB/DAB+ and Bluetooth. What you got (6V0919604B) is just a display. You also need glove box unit (infotainment reader), new USB port and harness to have it all connected. Glove box unit must be patched to enable new features. I can deliver if required - if you are interested pls contact me on PM.

PM

What is the current firmware in your unit?

No

If anyone finds any issues with the table above pls let me know

Sorry, I somehow missed your previous message. Installation is very easy - just remove glove box (6 screws Torx T20), take out old unit (2 removal key required), unplug old unit, plug in new unit, push new unit to it's place, mount glove box. No need to change USB as you already have 5Q0035726E.

Part numbers are the best option.

PM sent

I'm afraid I can't help here as I don't have this SW version :(

Unfortunately you already have MIB3 unit part number 3V0035820D - I don't deal with MIB3 units so cannot help you :(

VIN?

That's not entirely truth. MIB1 Bolero and MIB1 Amundsen display have RESOLUTION (not refresh rate - refresh rate is the same) of 400x240 so can't be used with MIB2 units as they have resolution of 800x480. MIB1 Columbus display (5E0919606) has resolution 800x480 so the same as MIB2 AMundsen / Bolero / Columbus so it CAN be used with these units. MIB2.5 Columbus has a resolution of 1024x600 and it works ONLY with display 5E0919606D.

No, infotainment unit 5Q0035819C is a simplified version of Bolero and it does NOT support CarPlay. It much be replaced, e.g. with 5Q0035840C full Bolero version. I can deliver it in Plug&Play version. You may also need to chnage USB - pls share VIN so I can check. Firmware updates are NOT available from SKODA update portal.

Much better :) You have SWING MY15, with Bluetooth, without DAB. You need display unit, glove box unit, new USB and harness to connect it all. I can deliver isuch set, pls contact me on PM if you are interested.

Too short number - should have 17 characters.

If it's not listed in the languages list then I'm afraid it's not possible in your unit.

So now you have Columbus MIB1, with Bluetooth, without DAB, part number 5E0035045D, with USB 5Q0035726C and fortunately you don't have CANTON sound system. You can install one of four different OEM glove box units: - MIB2 Bolero - MIB2 Amundsen - MIB2 Columbus - MIB2.5 Columbus You don't need to replace display unit unless you want to retrofit MIB2.5 Columbus as the only display unit that works with it is 5E0919606D. If you woulkd like to use Apple CarPlay then you also have to replace USB port. The question is what is your budget and which of listed below features are "must have": - Video playback from DVD, USB, SD - CD playback - OEM navigation - displaying OEM maps in Virtual Cluster (Active Info Display). All units support SmartLink (Android Auto, Apple CarPlay, MirrorLink), rear view camera, voice command. features that differ them: - MIB2 Bolero - no OEM navigation, no CD/DVD drive, no video playback from SD/USB - MIB2 Amundsen - OEM navigation, no CD/DVD drive, no video playback from SD/USB, support for displaying OEM maps in Active Info Display (Virtual Cluster) - MIB2 Columbus - OEM navigation, CD/DVD drive, video playback from SD/USB, no support for displaying OEM maps in Active Info Display (Virtual Cluster) - MIB2.5 Columbus - OEM navigation, CD/DVD drive, video playback from SD/USB, support for displaying OEM maps in Active Info Display (Virtual Cluster)