Skip to content

pab567

FREEDOMTech
  • Joined

  • Last visited

Everything posted by pab567

  1. As far as I remember it's really not required but I can check in reality later when I am back home. See the slots in the picture below.
  2. Exactly, below the screen but above the plastic trim there are two holes to insert the removal keys. There is NO need to remove the plastic trim.
  3. I've sent you link to download 6276 but I'm afraid this might be a hardware, not firmware problem. If firmware reflash doesn't help then you can try to have it repaired locally, start with resoldering chip i marked red in the picture below.
  4. Link to MST2_EU_SK_ZR_P0480T sent in PM
  5. What tool did you use? What is part number of unit you broke?
  6. I'm currently hardly available due to health / family issues. MIB2 High toolbox is your friend
  7. Answering your doubts and questions: Is 565 035 020 A a suitable retrofit into a Superb MK3 that originally had 5Q0 035 840 B? => Yes, it is Which connector is usually different between these two setups? => LVDS HSD video connector is pink in Bolero and grey in Columbus. Do I need an adapter cable, repinning, or only a small modification to the connector keying? => Small modification is enough as they are electrically the same, just take the sharp knife and cut out from the pink plug an excessive platic trim that prevents it from being plugged into grey socket. After fitting the hardware, what exactly is needed next: Component Protection removal => yes, online or patching coding/adaptations in 5F => yes, usually done by uploading raw data adaptation channel maps with VCDS and then modifying channels that were not updated automatically FEC/SWaP activation for navigation / voice / SmartLink => yes, usually done by patching and loading new FEC container Can any of this be done with ODIS + VCX SE, or is dealer online access still required for some parts? => All can be done by patching and ODIS / VCP / VCDS / VC Tool / OBD Eleven
  8. Pls share VIN in PM so I can check details of your car configuration.
  9. It is MIB1 Amundsen - no Android Auto, no Apple CarPlay, no more fresh maps available.
  10. Well, I can't give any advice for aftermarket units (especially chinese ones based on Android) but if you would like to get MIB STD2 PQ unit you can contact me. It should also be possible to repair your Columbus, this seems like a typical failure of PowerPIC that requires just resoldering.
  11. It's not possible to update your unit to enable smartlink - you have to replace infotainment reader, either to Bolero 5Q0035842x / 565035842, or Amundsen 5Q0035874x / 565035874 (x - any letter A, B or C). New unit must be patched to disable component protection and have new features enabled. I can deliver such unit in Plug&Play version if required.
  12. OEM solutions do not support current TV standards (DVBT) so all you can do is to find some aftermarket ones.
  13. link to MEN2_EU_SKGPx_P0080L_8755 sent in PM
  14. All check your PMs. For the future pls make sure to use @ when you want to ping anyone - @pab567 will work but if you miss @ then I don't get notification and unfortunately due to family and health issues I am not able to read all the threads.
  15. This is NOT EU unit - this is US unit. It will NOT work with EU firmware unless it is reworked...
  16. 5708? I have NEVER heard about such firmware, could you pls post the picture of label from upper case? 6270 neither 6276 will work in your unit for sure, don't even try
  17. Should be possible. You will need new plastic trim with both AUX and USB to replace the current one with USB only, AUX port number 5Q0035724, harness to connect it to infotainment unit, and finally some OBD diagnostics tool to have it enabled in infotainment unit.
  18. Same way as to any other unit... assuming it supports RVC - open it and check if there is a video chip onboard.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.