i just ordered my Motul 75w90ls as was using Comma previously 

1 hour ago, dubDEAN said:

i just ordered my Motul 75w90ls as was using Comma previously 

My friend You are the only one following my post,even there is no such complete build Like this one on the forum regarding every aspect of the car tuning..taste is a funny thing😂😂😂😂

Edited 19 May, 20215 yr by davojuri

When do we see it breaking 300 hp??? I'm following just for this (these fancy housing paintings, not my taste, right heheh)

4 hours ago, davojuri said:

My friend You are the only one following my post,even there is no such complete build Like this one on the forum regarding every aspect of the car tuning..taste is a funny thing😂😂😂😂

SINCE THE START  

On 19/05/2021 at 11:42, Juka said:

When do we see it breaking 300 hp??? I'm following just for this (these fancy housing paintings, not my taste, right heheh)

As I already wrote it's not about brute power but how to deliver it to the ground,smothness,go kart like drivetrain,monster breaking force etc. Blue colour is not tuning that I mentioned,only touch of class, but main thing is there are silicone hoses,ss braided hoses and top quality AN fittings. As for breaking 300hp it broke it already. Look at the dyno chart. 304 if I remember correctly👍👍. Much more power is usless for 0-100kmh, only after 100kmh it make sense so no faster startups With FWD and 500hp...but aiming to do that via forged stroker, CNCed head,and forged valvetrain,G25-550....

Edited 20 May, 20215 yr by davojuri

KN HP3001 -extra large size in place.

Oil cooler removed and emptied 

also a begging follower - the only one I get email alerts for 

New steering wheel badge

Due to the unexplained oil leak (after removal and cleaning od the Setrab oil cooler) from both 90⁰ AN10 adapters I replaced them With New ones and also on passenger side New male/genske straight adapter with 1/8npt plug (had only one straight adapter). First test rub and no leak for now. Hope it Will stay so🙂

It seems no more leaking😀.

I've installed these bronze bushings on selector from 42DD, and replaced worn plastic ones

Hood went for repainting, grinding up to Trizact 3000, than polishing with 3M green,yellow and blue paste at the end. Blue sheet is dust protection 😂😂😂😂

Seriously considering  wrapping the car in FlexShield transparent protective film.

Finally got new water cooler made with tube fin core. Now time forctesting Bosch EBP with bar plate and tube fin cooler and Craig Davies EBP25 with both water cooler and by measuring IAT during full throttle load and water temperature we will see which one is the best combo

Edited 14 June, 20214 yr by davojuri

Original rear wing from Croatia Octavia cup car is ready, painted,grinded and polished, ceramic Gtechniq Crystal ultra serum and hydrophobic coating to come before installation. 

14 hours ago, davojuri said:

Original rear wing from Croatia Octavia cup car is ready, painted,grinded and polished, ceramic Gtechniq Crystal ultra serum and hydrophobic coating to come before installation. 

great find  i want the mirrors if you ever find someone who makes the wrc style ones or cup

8 hours ago, dubDEAN said:

great find  i want the mirrors if you ever find someone who makes the wrc style ones or cup

I do6bt I Will. I wasafter WRC carbon kevlar wing,even guys in Czech Republic promissed to do one,but never realised that. WRC style is much nicer to me

First impression od the original Octavia Cup car rear wing is

SIMPLY AMAZING

 

 

 

3 hours ago, davojuri said:

First impression od the original Octavia Cup car rear wing is

SIMPLY AMAZING

 

 

 

need a full rear view too , also what rear disc conversion did you fit?

58 minutes ago, dubDEAN said:

need a full rear view too , also what rear disc conversion did you fit?

330mm Audi quattro discs and adapters for OEM calipers

like that a lot , i'm trying to find someone to collect me some bits and post from cz

16 hours ago, dubDEAN said:

like that a lot , i'm trying to find someone to collect me some bits and post from cz

That's Great plan. Originally I wanted original kevlar carbon WRC wing

10 hours ago, davojuri said:

That's Great plan. Originally I wanted original kevlar carbon WRC wing

that would've been cool

Full rear wiev of new rear wing

Edited 9 July, 20214 yr by davojuri

Hood has came back from painting, grinding up to Trizact 3000, polishing with 3M green, yellow and blue paste.

Small trick I used to avoid damage od newly painted hood from the grille which has mesh instead of rigid OEM insert meaning when You lift the hood over the grille You flex it and it scratches the painting on the hood so we did put double sided Wurth adhesive tape-narrow one 4mm apprpximatelly, to act as a damper, aside the fact that I don't lift hood over the grille but directly holding the hood lateraly from the grille