Jump to content

VCDS Adaptations. How do I ..........


Gizmo

Recommended Posts

 :( i just remembered, a few months ago i've driven a vw passat 2006 or 2007 with maxi-dot and on the bottom left of the maxi it showed the speed.The car was automatic, but i don't think there is a difference between automatic and manual for this kind of thing.

Link to comment
Share on other sites

  :( i just remembered, a few months ago i've driven a vw passat 2006 or 2007 with maxi-dot and on the bottom left of the maxi it showed the speed.The car was automatic, but i don't think there is a difference between automatic and manual for this kind of thing.

That was for the Cruise Control

Link to comment
Share on other sites

  • 1 month later...

Thought I'd add a few for the MQB Platform Octy III, that I have posted in the Octavia III section. I have enabled mirror dip on reverse, needle staging, rain closing and gallons consumed so far.

 

I couldn't get the comfort indicator flashes to work, and haven't tried the headlight washers yet. I've seen the option to enable lap timer (as per the new VRS) but didn't bother.

 

One thing i do need is the security access code for Module 5F to enable adaptations if anyone knows what it is - I am trying to enable the MIB Columbus to display the speed limit data embedded in the map.

 

I can't take credit for these, most have been taken from

 

stemei.de .VCDS Codierungen .Codierungsservice .Webdesign - Stefan Meier - VW Golf 7 - VCDS Codierungen, Webdesign

 

GolfGTIforum.co.uk - An independent forum for Volkswagen Golf GTI enthusiasts.

  Passenger mirror dip on reverse

  1. Select STG 52 (Türelektr. Pass.)

  2. Long STG coding -> function 07

  3. Byte 04

  4. Enable bit 2

  5. Enable bit 3

  6. Select STG 09 (wiring)

  7. STG access permissions -> Function 16

  8. Enter Unlock Code 31347

  9. STG adjustment -> function 10

  10. (15) Select Access control 2 Spiegelabsenkung bei Rueckwaertsfahrt auswählen

  11. Set value to active (active) Additionally possible: Hide menu item in Radio-/Navigationssystem, so you are even viable in the future to enable the feature on or off

  12. (20) Select Access control 2-Menuesteuerung Spiegelabsenkung auswählen

  13. Set value to active (active)

Enable Needle Sweep / Staging

  1. Go into [17] Instrument

  2. Coding -> Function 10

  3. Byte 1

  4. Enable Bit 0

Rain Closing

  1. Go into [09] Central Electronics

  2. Go into Security Access and enter 31347

  3. Go to adaptation channels and set the following:

    • (15) Access Control 2 - Regenschliessen_ein aus (Rain Closing on / off) - Select Active

    • (16) Access Control 2 - Regenschliessen_art (Rain closing Type) set to Permanent

    • (28) Access Control 2 - Menuesteuerung Regenschliessen (Menu Control Rain close) – Set to Active (enables the menu in the infotainment screen)

Adjust Comfort Turn Signals

  1. Go into [09] Central electronic

  2. Go to Security Access and enter 31347

  3. Go into Adaptation

  4. Select (2) - Turn Signal Controls-Komfortblinken Blinkzykien

  5. Type 5 in New Value (Default is 3)

Display Gallons Consumed

  1. Go into [17] Instruments

  2. Long Coding - (Function 07)

  3. Go to Byte 10

  4. Enable bit 4

Headlight Washer Frequency

To extend the interval cycles that the headlight washers will activate to:-  

  1. prevent the front of your clean car being sprayed, and

  2. to reduce the amount of screen wash usage.

 

  1. Go to [09] Central Electronics

  2. STG access permissions -> Function 16

  3. Enter access code 31347

  4. Go to adaptation channels (Function 10)

  5. Select channel 1 - Select "Number of operations front windsceen wiper washer per SRA activation" (in German - Frontscheibenwischer Anzahl Betätigungen Frontwaschanlage pro SRA Aktivierung auswählen)

  6. Adjust value to preference (no of times you can operate the windscreen washer stalk before the headlight washer activate).

  7. Select channel 3, and adjust the activate time for folding the switch to enable headlight washers in the first place.

  • Like 3
Link to comment
Share on other sites

  • 3 weeks later...

I think it was activated TBH, it just wasn't in the menus on the MIB Columbus

 

Those codings were taken off of a Golf/Leon list, so may not be 100% accurate to the Octy III.

 

EDIT - it isn't enabled by default. And the RLS needs coding, which VCDS can't do yet, but VCP can.

Link to comment
Share on other sites

  • 4 weeks later...
Adjust Comfort Turn Signals

  1. Go into [09] Central electronic

  2. Go to Security Access and enter 31347

  3. Go into Adaptation

  4. Select (2) - Turn Signal Controls-Komfortblinken Blinkzykien

  5. Type 5 in New Value (Default is 3)

 

HI!

 

When I did this to my 2014 FL Superb it didn't work until I did a reset to factory defaults in the Maxidot "Lights..." menu. I did all this while dark outside and after the reset to factory defaults it all worked. The day after, while in day light it was all back to three turn signals again ... I haven't tried it in the dark again, maybe that will still give the four signals again as I entered. Any idea to this behavior?

 

Have a nice Sunday afternoon!

Link to comment
Share on other sites

HI!

 

When I did this to my 2014 FL Superb it didn't work until I did a reset to factory defaults in the Maxidot "Lights..." menu. I did all this while dark outside and after the reset to factory defaults it all worked. The day after, while in day light it was all back to three turn signals again ... I haven't tried it in the dark again, maybe that will still give the four signals again as I entered. Any idea to this behavior?

 

... and no, did not work when dark either ... It is back to three signals again ...

 

Any suggestions?

Link to comment
Share on other sites

Sorry for spamming this thread but this setting is connected to the key fob inserted when the reset to factory setting is performed ... so switching keys made it break. So make sure to test every change with both keys ...

Link to comment
Share on other sites

  • 2 weeks later...

Enabling the automatic boot closing from the interior button and the remote keyfob on the O3 estate with the power trunk lid. Tested today on a vRS and it works fine.

 

http://www.briskoda.net/forums/topic/299252-enabling-boot-closing-from-keyfob-and-interior-button-using-vcds/

 

 

Apparently also works on the Superb with the power trunk as well

  • Like 1
Link to comment
Share on other sites

Enabling cornering fogs on a O3 - tested today on a vRS and works fine

 

http://www.briskoda.net/forums/topic/298170-enabling-cornering-fogs-with-vcds/

 

Works fine, but indicating doesn't enable the respective cornering fog. More research needed on this.

 

Both fogs do light up on selecting reverse, and turning the steering wheel enables them as well.

Link to comment
Share on other sites

Enabling cornering fogs on a O3 - tested today on a vRS and works fine

http://www.briskoda.net/forums/topic/298170-enabling-cornering-fogs-with-vcds/

Works fine, but indicating doesn't enable the respective cornering fog. More research needed on this.

Both fogs do light up on selecting reverse, and turning the steering wheel enables them as well.

Seems they do come on with indicating, but on a O3 vRS it seems to only illuminate the inner fog light bulb of the two.

Sent from my phone so please excuse brevity and spelling

Link to comment
Share on other sites

Dimming the LED Daylight (one side)by Turnlight

 

Leuchte2SL VLB10-Lichtfunktion G 2 auf "Blinken links aktiv (beide Phasen)" 
Leuchte2SL VLB10-Dimmwert auf 35    
Leuchte2SL VLB10-Dimming Direction GH 2 auf "minimize"    
Leuchte3SL VRB21-Lichtfunktion G 3 auf "Blinken rechts aktiv (beide Phasen)"    
Leuchte3SL VRB21-Dimmwert GH 3 auf 35    
Leuchte3SL VRB21-Dimming Direction GH 3 auf "minimize" 

 

 

 

LED Daylight off (one side) by Turnlight

 

Leuchte4TFL LB4-Lichtfunktion A 4 auf "nicht aktiv" 
Leuchte4TFL LB4-Lichtfunktion E 4 auf "Blinken links aktiv (beide Phasen)" 
Leuchte4TFL LB4-Dimmwert EF 4 auf 0 
Leuchte4TFL LB4-Dimming Direction EF 4 auf "minimize" 
Leuchte4TFL LB4-Lichtfunktion G 4 auf "Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)" 

Leuchte4TFL LB4-Dimmwert GH 4 auf 127 
Leuchte4TFL LB4-Dimming Direction GH 4 auf " 4 auf "maximize" 
Leuchte5TFL RB32-Lichtfunktion A 5 auf "nicht aktiv" 
Leuchte5TFL RB32-Lichtfunktion E 5 auf "Blinken links aktiv (beide Phasen)" 
Leuchte5TFL RB32-Dimmwert EF 5 auf 0 
Leuchte5TFL RB32-Dimming Direction EF 5 auf "minimize" 
Leuchte5TFL RB32-Lichtfunktion G 5 auf "Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)" 

Leuchte5TFL RB32-Dimmwert  5 GH auf 127 
Leuchte5TFL RB32-Dimming Direction GH 5 auf "maximize

 

 

Edited by triumph61
  • Like 3
Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...

Probably a repeated question but can't find the answer :wonder:

Have just taken delivery of my second Yeti 2014 1.2DSG Elegance in black, Anyway not wanting to pay dealer price I have got a Columbus RNS510 with DAB. Every thing works radio, dab, navigation etc and the steering wheel controls appear to work too.

 

My problem is the MFD display is no longer showing audio or any navigation display. I know it needs to be enabled but cannot find the codes. I have used VCDS on my car and have the following error codes

19-CAN Gateway -- Status: Malfunction 0010,

37-Navigation -- Status: Malfunction 0010,

56-Radio -- Status: Malfunction 0010

 

Any ideas please?

 

Thanks

 

Andy

Link to comment
Share on other sites

Are 37 and 56 ticked in the gateway installation list?  If not they need to be.

 

But I suspect you also need to code something in 37/56 (which is the same thing for a Columbus).  My guess is the BAP protocol setting, enable that and you might be good to go.  If that doesn't do it, can you post the whole scan for 19/37/56 please?

 

Adam

Link to comment
Share on other sites

Address 19: CAN Gateway (J533)       Labels: 7N0-907-530-V2.clb

   Part No SW: 7N0 907 530 AK    HW: 7N0 907 530 AK

   Component: J533  Gateway H57 1642  

   Revision:   H57       Serial number: 080214F1002915

   Coding: 356303

   Shop #: WSC 33361 790 00056

   VCID: 79F3F5A4F02793D6D3D-802C

 

2 Faults Found:

01304 - Radio 

            004 - No Signal/Communication - Intermittent

             Freeze Frame:

                    Fault Status: 00110100

                    Fault Priority: 2

                    Fault Frequency: 1

                    Reset counter: 58

                    Mileage: 239 km

                    Time Indication: 0

                    Date: 2001.14.04

                    Time: 16:58:18

 

01044 - Control Module Incorrectly Coded 

            000 - -

             Freeze Frame:

                    Fault Status: 01100000

                    Fault Priority: 1

                    Fault Frequency: 28

                    Reset counter: 255

                    Mileage: 239 km

                    Time Indication: 0

                    Date: 2001.14.04

                    Time: 17:06:59

 


Address 37: Navigation (J0506)       Labels: 1T0-035-680.clb

   Part No SW: 3T0 035 686 H    HW: 3T0 035 686 H

   Component: RNS-MID       H21 6270  

   Revision: AB001001    Serial number: SKZ6Z7N1103755

   Coding: 00000400000000000000

   Shop #: WSC 00000 000 00000

   VCID: 3B7F2FACBA9B61C6811-806E

 

   Subsystem 1 - Part No: 3T0 051 859 Q

   Component: EU West V10  8048 

 

7 Faults Found:

01042 - Control Module; Not Coded 

            000 - -

             Freeze Frame:

                    Fault Status: 01100000

                    Fault Priority: 5

                    Fault Frequency: 4

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

02877 - Digital Radio Antenna (R183) 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 12

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

00821 - Antenna 2 for Radio (R93) 

            011 - Open Circuit - Intermittent

             Freeze Frame:

                    Fault Status: 00101011

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 58

                    Mileage: 232 km

                    Time Indication: 0

 

00856 - Radio Antenna 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 10

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

01523 - Microphone for Telephone (R38) 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 19

                    Reset counter: 20

                    Mileage: 0 km

                    Time Indication: 0

 

01305 - Databus for Infotainment 

            004 - No Signal/Communication

             Freeze Frame:

                    Fault Status: 01100100

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 62

                    Mileage: 0 km

                    Time Indication: 0

 

00862 - Antenna for GPS Navigation (R50/R52) 

            011 - Open Circuit - Intermittent

             Freeze Frame:

                    Fault Status: 00101011

                    Fault Priority: 5

                    Fault Frequency: 16

                    Reset counter: 60

                    Mileage: 5763 km

                    Time Indication: 0

                    Date: 2002.14.11

                    Time: 03:35:59

 


Address 56: Radio (J0506)       Labels: 1T0-035-680.clb

   Part No SW: 3T0 035 686 H    HW: 3T0 035 686 H

   Component: RNS-MID       H21 6270  

   Revision: AB001001    Serial number: SKZ6Z7N1103755

   Coding: 00000400000000000000

   Shop #: WSC 00000 000 00000

   VCID: 3B7F2FACBA9B61C6811-806E

 

   Subsystem 1 - Part No: 3T0 051 859 Q

   Component: EU West V10  8048 

 

7 Faults Found:

01042 - Control Module; Not Coded 

            000 - -

             Freeze Frame:

                    Fault Status: 01100000

                    Fault Priority: 5

                    Fault Frequency: 4

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

02877 - Digital Radio Antenna (R183) 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 12

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

00821 - Antenna 2 for Radio (R93) 

            011 - Open Circuit - Intermittent

             Freeze Frame:

                    Fault Status: 00101011

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 58

                    Mileage: 232 km

                    Time Indication: 0

 

00856 - Radio Antenna 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 10

                    Reset counter: 20

                    Mileage: 232 km

                    Time Indication: 0

 

01523 - Microphone for Telephone (R38) 

            011 - Open Circuit

             Freeze Frame:

                    Fault Status: 01101011

                    Fault Priority: 5

                    Fault Frequency: 19

                    Reset counter: 20

                    Mileage: 0 km

                    Time Indication: 0

 

01305 - Databus for Infotainment 

            004 - No Signal/Communication

             Freeze Frame:

                    Fault Status: 01100100

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 62

                    Mileage: 0 km

                    Time Indication: 0

 

00862 - Antenna for GPS Navigation (R50/R52) 

            011 - Open Circuit - Intermittent

             Freeze Frame:

                    Fault Status: 00101011

                    Fault Priority: 5

                    Fault Frequency: 16

                    Reset counter: 60

                    Mileage: 5763 km

                    Time Indication: 0

                    Date: 2002.14.11

                    Time: 03:35:59

 

Hope this means something to you?

 

Thanks


Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.