Gizmo, please can you remove me from the list as no longer have vcds capability until I get an updated cable.

Cheers.

Hi could any of you guys maybe help with the following post please @Andymod @Nick P @WayTooTall 

 

 

@Muzza80 can you offer a scan service for my Octy? Cheers in advance if possible. 

Anyone in Jersey with a VCDS cable, need to have both fog lights on in order to register it here, car is a 2016 Octavia left hand drive, thanks 

@Gizmo Could you add me to the list? I’ve HEX-V2 and based in Carrickfergus, Northern Ireland.

Hi All,

Glasgow (UK) = polzky = hex-v2

 

 

 

 

@Gizmo If this is still going and used, can you add me please Newport/Cwmbran - GizmoThor8303 - HEX+CAN

Morning All,

 

I fell off of the list a while back but am happy to go back on.

 

Have HEX-V2 in the Northampton area.

 

Nick

Hi. Happy to help around if needed.

Northwood / west london = @Athrx = HEX-V2

 

I equipped myself with a Hex V2 interface recently and am happy to assist with scans and fault-finding.

Near Abingdon,  Oxfordshire. 

Really not interested in interior/exterior lighting mods, so if that's what you want, try someone else, ta.

Anyone with a VCDS close to the Manchester / Oldham areas?

 

I have the bulb out warning error pop up on the dash after turning the headlights on. All bulbs are working and the headlight bulbs have been replaced but the error still pops up. I would want the bulb out warning to be disabled if possible.

 

Skoda Fabia MK2 VRS.

4 hours ago, wah007 said:

Anyone with a VCDS close to the Manchester / Oldham areas?

Have a look for yourself with the following link.- Briskoda VCDS Owners Map (click me)

2 minutes ago, nta16 said:

Have a look for yourself with the following link.- Briskoda VCDS Owners Map (click me)

Thanks. Not everyone knows how to do it, so I thought that I'd ask on here, and if anyone knows how to do it then they could reply to me.

 

I've asked a few people and they're not too sure.

3 minutes ago, wah007 said:

Thanks. Not everyone knows how to do it, so I thought that I'd ask on here, and if anyone knows how to do it then they could reply to me.

 

I've asked a few people and they're not too sure.

Fair enough but I wondered how many might see your post in this thread, if you don't get a reply(s) from here then perhaps put up a sperate thread on this section asking, or on the Fabia MK2 section, as someone might know the procedure that those nearer to you with VCDS can follow.

 

Good luck.

 

Just now, nta16 said:

Fair enough but I wondered how many might see your post in this thread, if you don't get a reply(s) from here then perhaps put up a sperate thread on this section asking, or on the Fabia MK2 section, as someone might know the procedure that those nearer to you with VCDS can follow.

 

Good luck.

 

I understand what you mean, I'll make a separate thread on it. 👍

VCDS 23.3.1 & HEX V2 in Watford - happy to scan and suck air through teeth when the scan is done  

On 15/01/2013 at 14:14, Gizmo said:

Birmingham (South) = mluton = ??

Please remove me having a VAG COM

Hi Guys,

 

Aberdeen, Scotland  =  @B2E  =  HEX-NET,

 

 

Thanks

Gizmo, thanks for the information, I'm not too au fait with tech stuff, there's a couple of contacts in my area but I can't seem to get through? Any advice appreciated. 

Ignore - I've somehow logged into the wrong account....

Edited 9 October, 20232 yr by John A

That's better!  You can add me to this list @Gizmo. NN8 Wellingborough, Northants. Hex + CAN

I have the Hex-V2 package based in Bishops Stortford

We would like to be added to the list please

 

VCDS, ODIS, VCP, VCtool - VWAG independent workshop 

Edited 7 January, 20242 yr by East_Yorkshire_Retrofits

@Gizmo Please could you remove me from the list, my cable has broken, and I don't want to spend money on a V2 cable just yet.

 

Thank you.

 

Aston_bodger AKA Trevor

hello @Gizmo , could you please add me:

 

Stuttgart/Germany = @idikmen = HEX-V2

 

Thanks in advance