All Activity

I always have this activated, as all you have to do to release it is to blip the accelerator. The car will then ease forward (or backward) for you.

Schleswig-Holstein about 25Km or so from the centre of HH though I rarely go to the centre as it's a PITA unless you take the U-Bahn!

Which Firmware was Factory?

Hello I have some troubles with my engine and need desperate help. Here is he the story about Skoda Octavia 2.0 tdi ea288 DSG 2015 I ve bouhgt import car with full service history (Skoda Italy) which is rare in Serbia to find. Seller told me DPF was gutted in Italy and I was aware of this. 5000 km later problems started with light black smoke on hevy load and after few days a LOT of smoke on extra load (4 people, A/C on and acceleration from 100 to 130 kmh) check engine was activated with 2 codes showed on VCDS later. P0101 P13D6 P1734 (probably DSG selector microswitch problem) In next few days car was so much without power that it couldn't get to 80 kmh and on very very hevy smoke and some more error codes. - Insufficient pressure - NEXT, tuner said software wasn't downloaded and he implemented only software for DPF to ECU. Three mechanics said turbo-compressor is dead (including tuner). So I did remont (repair with 12 month guarantee). They also cleaned intercooler which was full of sludgy oil ( taking it apart from engine with new gasket), gutted cat and changed oil+filter. Car was fine. It was pulling ok and without smoke for some days but it started with light smoke on exhaust. First time when I was on highway, problems with MAF and Internal Pressure Sensor came back. Pipes are checked under smoke pressure machine. Injectors are great. 1. Do I have to check if EGR software is deleted ( with or without blanking ) ? 2. Change Heater with pressure sensor on 3rd cylider ? 3. Something else ? Please help I can not find any proper advice for this problem in my area Here is latest VCDS prinscreen codes

Further investigations: I believe the battery was disconnected for c.30secs last night, and it’s now getting angry about everything - but nothing showing up after a dtc clear (except open circuit on the pump control module when I took it off to check voltages etc) The module seems to get power ok, the wires are good to the pump - the pump doesn’t seem to get power all the time, and when I tried to do a live read of the power output the battery had had enough so is being recharged.. it seemed to spike to a c4v in the brief moment it turned over. No idea what I’m look for or at but I feel like there should be some sensor combo that should be able to tell me where in the system the actual problem is?? The 170 and 1700 seemed to flip between that and 450/4500 which seemed weird and borked sensor-ish but maybe that is normal in car land. Car electronics are absolute chaos and I have enough unruly computers in my day job! Aaaa

Nice @Lee01 ! which part of Germany is that? I'm not familiar enough with Waterlooville to know its twin towns... Wikipedia suggests Henstedt-Ulzburg which is not far at all from my favourite place in Germany: Hamburg (I did a year there on an Erasmus exchange)

("I work for Ford so no BS.") not a question that a technical minded person would ask as they'd know what "Bank1" and "Bank2" refers to. These VW Group 3 cylinder engines are only GDI. I thought that that Ford engine was an Ecoboom engine type, no?

You can change what is displayed on the drivers display

Just to ask again, can anyone confirm that the button marked above for the tilt relates to the seat base angle, please.

Remember that the "forever" is for the life of the belt, when it fails it will cause a lot of engine damage. Typically, a cambelt in a 2012 Fabia has a recommended service life of 5 years - but do include your engine type/code.

Welcome to Briskoda @Ali-B My old neck of the woods (Bishopstoke/ Hedge End etc) and now I'm in a town in Germany twinned with Waterlooville

Hi! I'm Ali from somewhere around the Southampton/Portsmouth Hampshire coast (not saying which as it's neither... ) I've been lurking for a while as My wife picked up a Fabia Mk III SE in Rallaye Green (Kermit!) last summer and it's been one of the most surprising cars I've ever been custodian of (lets face it, we never own these things, they are like cats... they let you look after them on their terms!) it's a 1.2 4 pot 90BHP and I never thought I'd say such great things about such a 'small' engine. It's essentially been pulling double duty as our main car as my car was supposed to be able to fill in the role of doing bigger drives etc but it's not had a great year with a catalogue of issues that sprung up since october taking it off the road and losing confidence until the final nail in it's coffin came when on the way to the garage to check out a few issues it started a new "whine" which ended up being the alternator lunching itself... so the combo of things all cropping up at the same time has relegated it to the status of "project car" and as I don't have space, time, funds or energy for a project car right now, it's going to be someone else's project car... :'( However that leads me to the second reason I've joined and that's due to acquiring a very low mileage ( 38K i.e. pensioner owned - gulp!) late '12 Octavia Mk2 Elegance in Dark Blue (Dynamic Blue?) and since it's missing a few options I'd have liked it to have had, I decided it was finally time to actually sign up - now that we're a 2-Skoda family...

My guess would be Blind Spot Assist - green for all clear?

Hello world I am somehow fan of Skoda for years. Dad had 3 of them. All cars that I owned had audio modified with OEM look. This one is the best on SQ.

can anybody explain what this is on the dash and how do i turn it off many thanks

Info such as which engine type you are asking about, for example. 2012 Fabias were made with a fair selection.

In other engines, not this one, obviously.

Hi, I have recently acquired a 2026 Kamiq. I have scraped one of the alloy wheels and have a quote for repair. However the repairer as flagged up that the car may have ADAS technology and it may need recalibration after the repair. Can anybody tell me what the story is with this and is it likely to be a problem?

Hello i have a 2015 mk3 lauren and klement octavia estate fitted with a columbus unit i have the ece2024 maps installed, i downloaded the latest map HIGH 12 F P350 EU 202345 from a link on here, when i installed the map it only lets me see the route from a distance of 25 miles and i cannot zoom in, any ideas??? Or can anyone put a link to the latest maps that work properly??

Check your PMs

Sawtoothing of tyre treads or failing wheel bearing can be common causes of droning noises - as can loosening exhaust baffles. Does drone frequency change with vehicle or engine speed? Does it change depending on throttle setting?

Yes same signs as mine

Literally get the car up whether ramp or jack get underneath and grab propshaft near the coupling and try to move it side to side or up and down. It can also be checked visually for signs of perishing. My car has 52k miles so around 80k km?

Yeah I'd never thought about it myself but been getting vibrations in lower speeds and it turns out to be this.... getting the part ordered and will replace soon as possible

Hi @pab567 , I have a Bolero MIB 1 radio in my Škoda: 5E0 035 840 A / HW 041 / MSTD_EU_SK_P3420 / MU 0435 Could you please send me a link to the software?